Package: ahcpd
Version: 0.53-r3
Depends: libc, ip, librt
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/ahcp/
Architecture: x86_64
Installed-Size: 61440
Filename: ahcpd_0.53-r3_x86_64.ipk
Size: 23279
SHA256sum: fb9a62e027adccdc4e692013de079d0586d5a34b4d10441dae6f817e5ad7e546
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
License: GPL-2.0-only MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: x86_64
Installed-Size: 81920
Filename: alfred_2024.1-r1_x86_64.ipk
Size: 27240
SHA256sum: 75f735063e11de37a6af6d81d163dacb2e25575275f5b4a155df1da9b69ef3cf
Description:  alfred is a user space daemon for distributing arbitrary local information
 over the mesh/network in a decentralized fashion. This data can be anything
 which appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-r1
Depends: libc, librt
Section: net
URL: http://www.pps.univ-paris-diderot.fr/~jch/software/babel/
Architecture: x86_64
Installed-Size: 20480
Filename: babel-pinger_0.1-r1_x86_64.ipk
Size: 4592
SHA256sum: 99bff14e5688c2ccfaf5ca88e24747832030c37dd3c2dff5606e7d35e50c7995
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.13.1-r1
Depends: libc, libubus20231128, libubox20240329
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/babel/
Architecture: x86_64
Installed-Size: 143360
Filename: babeld_1.13.1-r1_x86_64.ipk
Size: 68876
SHA256sum: 6d061790a6596d39cd8d330086d8a3ec9c9d9a439e39fdedd4b4433abc9df06a
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is an IETF standard protocol (RFC 8966).

Package: batctl-default
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: x86_64
Installed-Size: 122880
Filename: batctl-default_2024.1-r1_x86_64.ipk
Size: 47646
SHA256sum: 05babf6b9585af63a000ba535b03074223fa6f36565bfe4770d31d674cffc97d
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.1 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: x86_64
Installed-Size: 133120
Filename: batctl-full_2024.1-r1_x86_64.ipk
Size: 54954
SHA256sum: 0de3e64cea7d6b9b34b19cbb26bb309419f1394de29c2db3d05e3fc6976bcf61
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.1 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: x86_64
Installed-Size: 51200
Filename: batctl-tiny_2024.1-r1_x86_64.ipk
Size: 16668
SHA256sum: 6941f7a18be0cd5635ae1f6b69bfca98f81888cb5611892d1418ca5c573656f8
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.1 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-r1
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
URL: https://www.open-mesh.org/
Architecture: x86_64
Installed-Size: 112640
Filename: batmand_1440-r1_x86_64.ipk
Size: 44812
SHA256sum: cf252a5caf6dddef9ca4ac3a18008b0469ffff5f8a7fecf626be6a9c77d84bbf
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird2
Version: 2.14-r1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: x86_64
Installed-Size: 1003520
Filename: bird2_2.14-r1_x86_64.ipk
Size: 391418
SHA256sum: 8010fd576ff912a428fd5dbe7c16e4ccd61382f99283c519687a0f930fbfacc1
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.14-r1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: x86_64
Installed-Size: 30720
Filename: bird2c_2.14-r1_x86_64.ipk
Size: 9957
SHA256sum: 47e50047ee77c6d9d96f5108598066c7f76961135635a5d2fe3a9b8c56478b5e
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.14-r1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: x86_64
Installed-Size: 30720
Filename: bird2cl_2.14-r1_x86_64.ipk
Size: 8665
SHA256sum: bd2267316726e0b3e5beab0f845bc9fa1ae049058dd3ba0c6e99916adde28117
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx7-iwinfo
Version: 7.1.1-r5
Depends: libc, bmx7, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: x86_64
Installed-Size: 20480
Filename: bmx7-iwinfo_7.1.1-r5_x86_64.ipk
Size: 4772
SHA256sum: 4e849e9311c883b09fc368b5d8d3b989da7690992f301e89e568dd9fe5601984
Description:  link characteristics plugin via libiwinfo (recommended!)

Package: bmx7-json
Version: 7.1.1-r5
Depends: libc, bmx7, libjson-c5
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: x86_64
Installed-Size: 30720
Filename: bmx7-json_7.1.1-r5_x86_64.ipk
Size: 8495
SHA256sum: 9d2f2d5ede72ad37e9715356e57e82dd1a2119f9ab41e9ee6d507513ba030a35
Description:  json plugin based on json-c

Package: bmx7-sms
Version: 7.1.1-r5
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: x86_64
Installed-Size: 20480
Filename: bmx7-sms_7.1.1-r5_x86_64.ipk
Size: 6015
SHA256sum: 0f80c617029e0b0130f7226e924b62b136da3e7f9af2c19ecd303096d25fc41a
Description:  sms plugin

Package: bmx7-table
Version: 7.1.1-r5
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: x86_64
Installed-Size: 30720
Filename: bmx7-table_7.1.1-r5_x86_64.ipk
Size: 10192
SHA256sum: cd73cae87d4b90f66b2f6fa5a21326bb9b89d730a6e81da242f459eea6330df3
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: 7.1.1-r5
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: x86_64
Installed-Size: 20480
Filename: bmx7-topology_7.1.1-r5_x86_64.ipk
Size: 5523
SHA256sum: 9307d4d62057126240af1f4fc84562d5cd96968b65bbed8042e59b8a20a811a9
Description:  topology plugin

Package: bmx7-tun
Version: 7.1.1-r5
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: x86_64
Installed-Size: 71680
Filename: bmx7-tun_7.1.1-r5_x86_64.ipk
Size: 26260
SHA256sum: ab549d4589002d27643948f85bb3bbda5a732c43895d37ba0926b45401e3a6e4
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: 7.1.1-r5
Depends: libc, bmx7, libuci20130104
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: x86_64
Installed-Size: 40960
Filename: bmx7-uci-config_7.1.1-r5_x86_64.ipk
Size: 9276
SHA256sum: 5ec5061468d0ee04ae9af328c6ea72a214702ba37740eea2106bec6dba789996
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: 7.1.1-r5
Depends: libc, zlib, libmbedtls13, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: x86_64
Installed-Size: 358400
Filename: bmx7_7.1.1-r5_x86_64.ipk
Size: 170434
SHA256sum: 463b0a0159b19f5567275083273a36f1f708a04cb9562e21b239cc954ad15558
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: cjdns-tests
Version: 21.1-r6
Depends: libc, libpthread, librt
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: x86_64
Installed-Size: 706560
Filename: cjdns-tests_21.1-r6_x86_64.ipk
Size: 330373
SHA256sum: b9b0ff50713513e4f2326fc620c75504ccd08d7a5132d40b361ee93ef5656bf4
Description:  cjdns test cases

Package: cjdns
Version: 21.1-r6
Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: x86_64
Installed-Size: 849920
Filename: cjdns_21.1-r6_x86_64.ipk
Size: 384588
SHA256sum: 1ba3617c531c5ec2fb87f485e3d287086667815379fa4e492d3ee0f5121435a5
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: hnet-full-l2tp
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: x86_64
Installed-Size: 10240
Filename: hnet-full-l2tp_2018.12.21~c4376661-r1_x86_64.ipk
Size: 1417
SHA256sum: 6737bca715e94c9964aeaa042c03df503575a05f486ed09c2526e909ee3fbd1a
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: x86_64
Installed-Size: 10240
Filename: hnet-full-secure_2018.12.21~c4376661-r1_x86_64.ipk
Size: 950
SHA256sum: 2f1f4e7fe39669de93eb498e01bb8144e0c191ff239175a7d789060361026a26
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: x86_64
Installed-Size: 10240
Filename: hnet-full_2018.12.21~c4376661-r1_x86_64.ipk
Size: 936
SHA256sum: fe9316ab719b3d4d5a2e9ebcf3e8594505882caefeb5dfa4cfcf72191d020953
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: x86_64
Installed-Size: 235520
Filename: hnetd-nossl_2018.12.21~c4376661-r1_x86_64.ipk
Size: 103696
SHA256sum: 3187093be65953e73eb523a320ffe08d0197c561330c51111f9c11a024f39fa9
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: x86_64
Installed-Size: 256000
Filename: hnetd-openssl_2018.12.21~c4376661-r1_x86_64.ipk
Size: 114606
SHA256sum: 93df9a1886c1dda60c4751314088721d5cc843ef840c8e6be734ee3b7ebf8926
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-cjdns
Version: 1.3-r9
Depends: libc, cjdns, luci-compat, luci-base
License: GPL-3.0-or-later
Section: luci
URL: https://github.com/cjdelisle/cjdns
Architecture: x86_64
Installed-Size: 40960
Filename: luci-app-cjdns_1.3-r9_x86_64.ipk
Size: 6584
SHA256sum: d75bb99c6152bf62244386df208ffd8cbe99dbbf1f7337b5c70c2b52b9e4cc73
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2018.12.21~c4376661-r1
Depends: libc
License: GPL-2.0-only
Section: luci
Architecture: x86_64
Installed-Size: 235520
Filename: luci-app-hnet_2018.12.21~c4376661-r1_x86_64.ipk
Size: 57614
SHA256sum: 3f65886031b71c48970f7e656cea93e072ab48cae0c51658dfaabfd5c652279d
Description:  HNCP Homenet configuration and visualization

Package: luci-app-olsrd2
Version: 0.2.6-r16
Depends: oonf-olsrd2, luci-mod-admin-full, libc
Section: luci
Architecture: all
Installed-Size: 61440
Filename: luci-app-olsrd2_0.2.6-r16_all.ipk
Size: 7782
SHA256sum: eec3f8cb8d87ec7efbb158abca04090eb109d30732ffe9a92031c45bbca9089d
Description:  OLSR2 configuration and status module

Package: mcproxy
Version: 2017.08.24~93b5ace4-r9
Depends: libc, libpthread, libstdcpp6
License: GPL-2.0-or-later
Section: net
URL: https://mcproxy.realmv6.org
Architecture: x86_64
Installed-Size: 358400
Filename: mcproxy_2017.08.24~93b5ace4-r9_x86_64.ipk
Size: 131747
SHA256sum: 7797dfb79c41d28826bc0e013f797c62a7c2802ae4f277ab53e0a4a6fe989a82
Description:  mcproxy is a free & open source implementation of the IGMP/MLD proxy function (see  RFC 4605) for Linux systems.
 It operates on the kernel tables for multicast routing and allows for multiple instantiations,
 as well as dynamically changing downstream interfaces.

Package: mesh11sd
Version: 3.1.1-r1
Depends: libc
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/mesh11sd
Architecture: all
Installed-Size: 92160
Filename: mesh11sd_3.1.1-r1_all.ipk
Size: 19073
SHA256sum: fe28941a7a4ccc33938ce420f23cd2b4ef7fe61f4f509337737179fbf28c4663
Description:  Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks.
 It was originally designed to leverage 802.11s mesh networking at Captive Portal venues.
 This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes.
 It allows all mesh parameters supported by the wireless driver to be set in the uci config file.
 Settings take effect immediately without having to restart the wireless network.
 Default settings give rapid and reliable layer 2 mesh convergence.
 Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set.
 Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes.
 The mesh11sd daemon dynamically checks configured parameters and sets them as required.
 Upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled,
 and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh.
 Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier.
 This version does not require a Captive Portal to be running.

Package: minimalist-pcproxy
Version: 2014.12.12~2d6d1b0b-r7
Depends: libc, libubox20240329
License: BSD-3-Clause
Section: net
URL: https://github.com/fingon/minimalist-pcproxy
Architecture: x86_64
Installed-Size: 30720
Filename: minimalist-pcproxy_2014.12.12~2d6d1b0b-r7_x86_64.ipk
Size: 7452
SHA256sum: a849fd176ff71b9b230773e44a6afe3def9deffad034ca18ea723d5915b043fb
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: naywatch
Version: 1-r7
Depends: libc, owipcalc
License: GPL-2.0-only
Section: utils
Architecture: all
Installed-Size: 20480
Filename: naywatch_1-r7_all.ipk
Size: 2853
SHA256sum: 2f7470dd02a55b9c7079ffb7932ebf276ebb401bae1d7c7f5c61ee74046c7af5
Description:  Reboots or triggers watchdog if no link-local neighbor is available.
 
 Important:
 Be careful when you do a sysupgrade. Stop naywatch first, and make
 sure procd took control again of the watchdog.
 You can do this using 'ubus call system watchdog'.  Status should be "running".

Package: ndppd
Version: 0.2.5-r2
Depends: libc, libstdcpp6
License: GPL-3.0-or-later
Section: net
URL: http://www.priv.nu/projects/ndppd/
Architecture: x86_64
Installed-Size: 92160
Filename: ndppd_0.2.5-r2_x86_64.ipk
Size: 34365
SHA256sum: 2af46a4c65d1748d96d9a981b0f0b694540ace69c86922775017ac69d9a5c0cc
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 5.0.2-r1
Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra
License: GPL-2.0-or-later
Section: net
URL: https://github.com/nodogsplash/nodogsplash
Architecture: x86_64
Installed-Size: 143360
Filename: nodogsplash_5.0.2-r1_x86_64.ipk
Size: 48466
SHA256sum: b5ac56ca3780871279bd73e4be184a1e0f3fee1ee0773294f022a7a7ce310d97
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.

Package: ohybridproxy
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329, mdnsd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: x86_64
Installed-Size: 40960
Filename: ohybridproxy_2020.05.22~0dfef1eb-r3_x86_64.ipk
Size: 11960
SHA256sum: 5acc1603330a370c57e7bd279f9644c870a6d16eaa5edcbdb032fc2653dc6ba7
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: olsrd-mod-arprefresh
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 20480
Filename: olsrd-mod-arprefresh_2023.06.12~a9b3f1ac-r1_x86_64.ipk
Size: 2778
SHA256sum: e02d53e5f20680bd3f8ae34bf4f2c32dd5f60bc9d3dcefa5207af5b362261d59
Description:  Kernel ARP cache refresh plugin

Package: olsrd-mod-bmf
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd, kmod-tun
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 40960
Filename: olsrd-mod-bmf_2023.06.12~a9b3f1ac-r1_x86_64.ipk
Size: 12994
SHA256sum: 049a2c7cb157140eb2c3ee067800eaf04641325aec23cd788599ed11ff376f9c
Description:  Basic multicast forwarding plugin

Package: olsrd-mod-dot-draw
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 20480
Filename: olsrd-mod-dot-draw_2023.06.12~a9b3f1ac-r1_x86_64.ipk
Size: 4481
SHA256sum: 1beef3bb47bae2cce7aac80e4aaf983bb3e0f7f4fb5ec5fcc069bf747300ef1a
Description:  Dot topology information plugin

Package: olsrd-mod-dyn-gw-plain
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 20480
Filename: olsrd-mod-dyn-gw-plain_2023.06.12~a9b3f1ac-r1_x86_64.ipk
Size: 3090
SHA256sum: 7dcd21650d9cc916e241ff4c3f4de7eaf4fb17686edf7e2650a7ff6691bd1020
Description:  Dynamic internet gateway plain plugin

Package: olsrd-mod-dyn-gw
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 20480
Filename: olsrd-mod-dyn-gw_2023.06.12~a9b3f1ac-r1_x86_64.ipk
Size: 4847
SHA256sum: 6365b0a81357b24c18a917e72286f4502fe020d01a978febab12b635a8098858
Description:  Dynamic internet gateway plugin

Package: olsrd-mod-filtergw
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 20480
Filename: olsrd-mod-filtergw_2023.06.12~a9b3f1ac-r1_x86_64.ipk
Size: 3326
SHA256sum: 0d3c7f1319ee4b733d06e7bcdf3c1bc10da304a7eaed18194dadbb9777627e6e
Description:  Filter Gateway plugin

Package: olsrd-mod-httpinfo
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 81920
Filename: olsrd-mod-httpinfo_2023.06.12~a9b3f1ac-r1_x86_64.ipk
Size: 31529
SHA256sum: 7b2f33eaa9e437a2620d79fd128ba7468682a0d0207165f3d17ad8876cf2e8b3
Description:  Small informative web server plugin

Package: olsrd-mod-jsoninfo
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 61440
Filename: olsrd-mod-jsoninfo_2023.06.12~a9b3f1ac-r1_x86_64.ipk
Size: 23235
SHA256sum: a92174925e6e44d21c6f916f9d47c97fd5d9957d3e59bc62f313d6ea7089f31c
Description:  Small informative plugin with JSON output

Package: olsrd-mod-mdns
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 40960
Filename: olsrd-mod-mdns_2023.06.12~a9b3f1ac-r1_x86_64.ipk
Size: 9966
SHA256sum: 33029b94fff04968d988dc118bfa315d61a0a62f683cc7757b53080d7a734bcc
Description:  MDNS/Zeroconf/Bonjour packet distribution

Package: olsrd-mod-nameservice
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 40960
Filename: olsrd-mod-nameservice_2023.06.12~a9b3f1ac-r1_x86_64.ipk
Size: 11704
SHA256sum: 4cb7155f2379001c76385c2dd0aeb30e592d4b69fcfa8b933663cab00e594dec
Description:  Lightweight hostname resolver plugin

Package: olsrd-mod-netjson
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 40960
Filename: olsrd-mod-netjson_2023.06.12~a9b3f1ac-r1_x86_64.ipk
Size: 13896
SHA256sum: a5c443fbd9f3b756eb8b9affbd0b2702a5bd2c4b1856c46cf26ee03f0c174581
Description:  netjson plugin with JSON output

Package: olsrd-mod-p2pd
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 30720
Filename: olsrd-mod-p2pd_2023.06.12~a9b3f1ac-r1_x86_64.ipk
Size: 9408
SHA256sum: 946b70f38e52ec7ac5adc3dd288b7499513d01319f8c9e5a9b0c093fa4667d79
Description:  Peer to Peer Discovery plugin

Package: olsrd-mod-pgraph
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 20480
Filename: olsrd-mod-pgraph_2023.06.12~a9b3f1ac-r1_x86_64.ipk
Size: 3703
SHA256sum: 9ae41dbb558e7d50755d903c95b59d1c4c389a0c496f6c7e52227fd468157bf5
Description:  output network topology for pgraph

Package: olsrd-mod-pud
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd, libgps30
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 194560
Filename: olsrd-mod-pud_2023.06.12~a9b3f1ac-r1_x86_64.ipk
Size: 62555
SHA256sum: 2cf14f9a83c5689f93b3272ce256ab8dec6653d553e56157d98e0d7db609eb05
Description:  Position Update Distribution plugin

Package: olsrd-mod-quagga
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 30720
Filename: olsrd-mod-quagga_2023.06.12~a9b3f1ac-r1_x86_64.ipk
Size: 7111
SHA256sum: ede71dff368fe1cada0a12ed5603efa9380571451e43ec3105d21d4c5c19bb95
Description:  Quagga plugin

Package: olsrd-mod-secure
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 40960
Filename: olsrd-mod-secure_2023.06.12~a9b3f1ac-r1_x86_64.ipk
Size: 10717
SHA256sum: 2b3bf812ef256f13bb0224cadd04c8044c7646ceeab2a0ee00ca82c7721f0bfe
Description:  Message signing plugin to secure routing domain

Package: olsrd-mod-sgwdynspeed
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 20480
Filename: olsrd-mod-sgwdynspeed_2023.06.12~a9b3f1ac-r1_x86_64.ipk
Size: 5347
SHA256sum: 628d263eb1dc2f6f837024c7417ea60d3c24060cc8f41247b0fc1314977df5db
Description:  Smart Gateway dynamic speed plugin

Package: olsrd-mod-txtinfo
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 40960
Filename: olsrd-mod-txtinfo_2023.06.12~a9b3f1ac-r1_x86_64.ipk
Size: 15290
SHA256sum: c11302af27d2b2493ceb5cd7377b59f4dd8c0b2ab7f06f2253e81326fb997770
Description:  Small informative web server plugin

Package: olsrd-mod-watchdog
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 20480
Filename: olsrd-mod-watchdog_2023.06.12~a9b3f1ac-r1_x86_64.ipk
Size: 2434
SHA256sum: a9f53dc8a55eceee743f682009cf1ffaf3e7cd49acc7065fad37d21bf2b2d39e
Description:  Watchdog plugin

Package: olsrd-utils
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 10240
Filename: olsrd-utils_2023.06.12~a9b3f1ac-r1_x86_64.ipk
Size: 1945
SHA256sum: 3a033673ec717c8866ca0324cee66df40aac900b51b4e41b5843b7a92f86d61f
Description:  Utils for OLSRD

Package: olsrd
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, libpthread, libubus20231128, iptables, ip6tables
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 327680
Filename: olsrd_2023.06.12~a9b3f1ac-r1_x86_64.ipk
Size: 140406
SHA256sum: 4a236fefab2c2c0a54fa4c742324b2e12259606ec71aec8ffcf89f2456f6ca45
Description:  OLSR (Optimized Link State Routing) daemon

Package: oonf-dlep-proxy
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 450560
Filename: oonf-dlep-proxy_2022.08.25~fb15d54d_x86_64.ipk
Size: 183100
SHA256sum: 6a9b4831b21db887520db282fc4d505bec052f9672278c54bc48ba9b3c001fd2
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 440320
Filename: oonf-dlep-radio_2022.08.25~fb15d54d_x86_64.ipk
Size: 177751
SHA256sum: 294881cf5ed788e0947eca1fae4e1ab6cd44deb0e4cf19555c5e113c6d78c1a1
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 10240
Filename: oonf-init-scripts_0.9.1-r3_x86_64.ipk
Size: 2302
SHA256sum: a2c99c6fd228323d838167672586b529d98186b51527f79be95fd8e6dfccd72a
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 2022.08.25~1cec9b21
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 645120
Filename: oonf-olsrd2_2022.08.25~1cec9b21_x86_64.ipk
Size: 259853
SHA256sum: 2cf0c60566c04aa5000e7c2d8ccaf0dadc531e842ccaf24402d444f79a43cdaa
Description:  Build Olsrd V2 Routing Agent

Package: opennds
Version: 10.2.0-r1
Depends: libc, libmicrohttpd-no-ssl
Conflicts: nodogsplash
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/opennds
Architecture: x86_64
Installed-Size: 563200
Filename: opennds_10.2.0-r1_x86_64.ipk
Size: 159260
SHA256sum: 18481152bfa242a399e7a5a3328fa7371383cf1ecbf7d211861c9cffef4e1941
Description:  openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal.
 It provides a border control gateway between a public local area network and the Internet.
 It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points.
 Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported.
 This version uses nftables.

Package: pimbd
Version: 2018.06.19~dbf4e591-r4
Depends: libc, netifd
License: Apache-2.0
Section: net
URL: https://github.com/Oryon/pimbd.git
Architecture: x86_64
Installed-Size: 204800
Filename: pimbd_2018.06.19~dbf4e591-r4_x86_64.ipk
Size: 88751
SHA256sum: f5db55d61a002948f03805ba7b0b4418e26257b770d11f6b96b5d810d1b0f083
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be
 installed and running in order for PIM to function.

Package: prince
Version: 0.4-r3
Depends: libc, libjson-c5, libpthread
License: MIT
Section: net
URL: https://github.com/AdvancedNetworkingSystems/prince
Architecture: x86_64
Installed-Size: 112640
Filename: prince_0.4-r3_x86_64.ipk
Size: 31290
SHA256sum: 03e078967fd7c8bb66493a44052632a561af3c33d52152be4a7b6e3539ee3445
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: vis
Version: 2013.04.07~7710cce4-r9
Depends: libc, libpthread
License: GPL-2.0-only
Section: net
URL: https://www.open-mesh.org/
Architecture: x86_64
Installed-Size: 40960
Filename: vis_2013.04.07~7710cce4-r9_x86_64.ipk
Size: 11661
SHA256sum: 76a6e1877dd0c3b27d55daed43f2ec599932053e51b00647a528c405a7c9eb7e
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: x86_64
Installed-Size: 30720
Filename: zonestitcher_2020.05.22~0dfef1eb-r3_x86_64.ipk
Size: 9722
SHA256sum: b67ca25a8d40f9374e6bb1dc2290ed79c4ed9edd2383274cc26b979adb436dd5
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.