Package: ahcpd
Version: 0.53-r3
Depends: libc, ip, librt
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/ahcp/
Architecture: mipsel_mips32
Installed-Size: 81920
Filename: ahcpd_0.53-r3_mipsel_mips32.ipk
Size: 23558
SHA256sum: 587be1ccac2d0a4bca5ec7d95ef953c685ff795c9483b09575068259418202d5
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
License: GPL-2.0-only MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mipsel_mips32
Installed-Size: 143360
Filename: alfred_2024.1-r1_mipsel_mips32.ipk
Size: 27785
SHA256sum: 1d61e145094ede11aba76d6512fab5ee2e90b7bfc1fd47020f67b9bf0618b676
Description:  alfred is a user space daemon for distributing arbitrary local information
 over the mesh/network in a decentralized fashion. This data can be anything
 which appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-r1
Depends: libc, librt
Section: net
URL: http://www.pps.univ-paris-diderot.fr/~jch/software/babel/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: babel-pinger_0.1-r1_mipsel_mips32.ipk
Size: 4647
SHA256sum: 9c7fbad64e7f8acc4d8bb1a2dc4c7d0a0e7542f67bebf450f1e9762d26853c38
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.13.1-r1
Depends: libc, libubus20231128, libubox20240329
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/babel/
Architecture: mipsel_mips32
Installed-Size: 153600
Filename: babeld_1.13.1-r1_mipsel_mips32.ipk
Size: 64007
SHA256sum: 8170c99baf0d65735d7b9cb8bd49f9f0bf24a052191db3786f8c76387f1ab7c5
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is an IETF standard protocol (RFC 8966).

Package: batctl-default
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mipsel_mips32
Installed-Size: 143360
Filename: batctl-default_2024.1-r1_mipsel_mips32.ipk
Size: 42907
SHA256sum: 0d128008ee61246a9a8d9f2f979f1d4ce2dedb1b2e23d8f7cc39045c1107f592
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.1 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mipsel_mips32
Installed-Size: 143360
Filename: batctl-full_2024.1-r1_mipsel_mips32.ipk
Size: 50207
SHA256sum: d6daa8f9165c6d837597f3b6b3a68f64e7e7ca27c4a8ed38ff7de444ef725967
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.1 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: batctl-tiny_2024.1-r1_mipsel_mips32.ipk
Size: 14540
SHA256sum: 196521801a18cd2790b96c2b2ed5025850b8f242a46a98f1c45280a737700faf
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.1 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-r1
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
URL: https://www.open-mesh.org/
Architecture: mipsel_mips32
Installed-Size: 143360
Filename: batmand_1440-r1_mipsel_mips32.ipk
Size: 40156
SHA256sum: 90286f1b91beac8ed5ff0e9938b1f0e69f7f5cc7036d5bcc3c4bdfab7a3f1a89
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird2
Version: 2.14-r1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: mipsel_mips32
Installed-Size: 1075200
Filename: bird2_2.14-r1_mipsel_mips32.ipk
Size: 387363
SHA256sum: 2ddb5c1479e91285261a6cead2843cb9ebb5516c537c9d63c790d8b89c3c8b99
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.14-r1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: bird2c_2.14-r1_mipsel_mips32.ipk
Size: 9880
SHA256sum: 2fca13a33e16f11ad7eba23330e46f8dfd077279df5e9f995db1b748abb45e17
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.14-r1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: bird2cl_2.14-r1_mipsel_mips32.ipk
Size: 8592
SHA256sum: 27f0876d799fd569a88d0037484c09ae8fccf05937a477d9756f89b89eea524c
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx7-iwinfo
Version: 7.1.1-r5
Depends: libc, bmx7, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: bmx7-iwinfo_7.1.1-r5_mipsel_mips32.ipk
Size: 4680
SHA256sum: a432b66158ba489cc277989ef87341d408ee838212e98d85d6bb5ce9caddab46
Description:  link characteristics plugin via libiwinfo (recommended!)

Package: bmx7-json
Version: 7.1.1-r5
Depends: libc, bmx7, libjson-c5
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: bmx7-json_7.1.1-r5_mipsel_mips32.ipk
Size: 8585
SHA256sum: 5b8089c418b7b498c9d3a8d2349a9d12f4ac1e279126f35ce23ad9761954b09b
Description:  json plugin based on json-c

Package: bmx7-sms
Version: 7.1.1-r5
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: bmx7-sms_7.1.1-r5_mipsel_mips32.ipk
Size: 6110
SHA256sum: 6905a7e02fddd2c526b02bb7abd2aa3c001f10fd67d1fe53373a3ba89b1f3f7f
Description:  sms plugin

Package: bmx7-table
Version: 7.1.1-r5
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: bmx7-table_7.1.1-r5_mipsel_mips32.ipk
Size: 10144
SHA256sum: 2e5d4ce6b47b83be6c453f0b5f6781e6f8e392ab9dc1fabc17abf17c0e43fd07
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: 7.1.1-r5
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: bmx7-topology_7.1.1-r5_mipsel_mips32.ipk
Size: 5629
SHA256sum: 876a8006e24e0ec066655221c30f7371ac2b42236dd65a4c00b1743f3186f88f
Description:  topology plugin

Package: bmx7-tun
Version: 7.1.1-r5
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_mips32
Installed-Size: 81920
Filename: bmx7-tun_7.1.1-r5_mipsel_mips32.ipk
Size: 25852
SHA256sum: fad40006d55e961c348e638f646e7f37f961e9ada8b4262f046431ae8708d2ae
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: 7.1.1-r5
Depends: libc, bmx7, libuci20130104
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_mips32
Installed-Size: 81920
Filename: bmx7-uci-config_7.1.1-r5_mipsel_mips32.ipk
Size: 8815
SHA256sum: 5f58eee2e49ad848d8a5bcfe171a2292cf6f69b37fca6d5b763da582164f622a
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: 7.1.1-r5
Depends: libc, zlib, libmbedtls13, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_mips32
Installed-Size: 419840
Filename: bmx7_7.1.1-r5_mipsel_mips32.ipk
Size: 176178
SHA256sum: b63befbe2f98263c5cc03e4ffea82266fd12c67e41033efe95b11ba3cf31a99d
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: cjdns-tests
Version: 21.1-r6
Depends: libc, libpthread, librt
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: mipsel_mips32
Installed-Size: 901120
Filename: cjdns-tests_21.1-r6_mipsel_mips32.ipk
Size: 378017
SHA256sum: 7b14a573c9b644f317638f5dce616b3f185d53cf4180234970ab9cd7e64f7d52
Description:  cjdns test cases

Package: cjdns
Version: 21.1-r6
Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: mipsel_mips32
Installed-Size: 1064960
Filename: cjdns_21.1-r6_mipsel_mips32.ipk
Size: 455469
SHA256sum: 60f9f706231c9451fa6200734a5d150d18d6d5172f140f528a525585861e35a9
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: hnet-full-l2tp
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mipsel_mips32
Installed-Size: 10240
Filename: hnet-full-l2tp_2018.12.21~c4376661-r1_mipsel_mips32.ipk
Size: 1418
SHA256sum: 12608c89c3d0b0fd2939f1bdd3a58d830ba1f2bd08337ece8feed6190f948ee9
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mipsel_mips32
Installed-Size: 10240
Filename: hnet-full-secure_2018.12.21~c4376661-r1_mipsel_mips32.ipk
Size: 953
SHA256sum: 01b6df5900d74db7662c81208e669a578fea7f35b64862286ae60fac04a1d173
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mipsel_mips32
Installed-Size: 10240
Filename: hnet-full_2018.12.21~c4376661-r1_mipsel_mips32.ipk
Size: 939
SHA256sum: 97ece994c100b27f26149afa39d2c5359ea1a03c052a3061dbb414f18b5a3e58
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mipsel_mips32
Installed-Size: 235520
Filename: hnetd-nossl_2018.12.21~c4376661-r1_mipsel_mips32.ipk
Size: 96600
SHA256sum: ade4d7192840d3185d8bed62a506b1a63de44d3c87cb643a3a7f6c193396a5cb
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mipsel_mips32
Installed-Size: 296960
Filename: hnetd-openssl_2018.12.21~c4376661-r1_mipsel_mips32.ipk
Size: 106835
SHA256sum: 10690aeada471176365988f8d4224d73c5422090f525640e5c3f99fbe67441ee
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-cjdns
Version: 1.3-r9
Depends: libc, cjdns, luci-compat, luci-base
License: GPL-3.0-or-later
Section: luci
URL: https://github.com/cjdelisle/cjdns
Architecture: mipsel_mips32
Installed-Size: 40960
Filename: luci-app-cjdns_1.3-r9_mipsel_mips32.ipk
Size: 6583
SHA256sum: 51fca02b05e6a59e10d490b9929d65712686f8dd3a5ee08acbc7f036b2b4d63f
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2018.12.21~c4376661-r1
Depends: libc
License: GPL-2.0-only
Section: luci
Architecture: mipsel_mips32
Installed-Size: 235520
Filename: luci-app-hnet_2018.12.21~c4376661-r1_mipsel_mips32.ipk
Size: 57615
SHA256sum: 31ba216c47a6ed4debe25bc6e29c039619c20a92db0ef52076556e21e2f01fa9
Description:  HNCP Homenet configuration and visualization

Package: luci-app-olsrd2
Version: 0.2.6-r16
Depends: oonf-olsrd2, luci-mod-admin-full, libc
Section: luci
Architecture: all
Installed-Size: 61440
Filename: luci-app-olsrd2_0.2.6-r16_all.ipk
Size: 7782
SHA256sum: eec3f8cb8d87ec7efbb158abca04090eb109d30732ffe9a92031c45bbca9089d
Description:  OLSR2 configuration and status module

Package: mcproxy
Version: 2017.08.24~93b5ace4-r9
Depends: libc, libpthread, libstdcpp6
License: GPL-2.0-or-later
Section: net
URL: https://mcproxy.realmv6.org
Architecture: mipsel_mips32
Installed-Size: 419840
Filename: mcproxy_2017.08.24~93b5ace4-r9_mipsel_mips32.ipk
Size: 120367
SHA256sum: 04c3ba1a72bfe613fd27bc41ad036095230372cb4696b9b6b924e9f0de770b85
Description:  mcproxy is a free & open source implementation of the IGMP/MLD proxy function (see  RFC 4605) for Linux systems.
 It operates on the kernel tables for multicast routing and allows for multiple instantiations,
 as well as dynamically changing downstream interfaces.

Package: mesh11sd
Version: 3.1.1-r1
Depends: libc
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/mesh11sd
Architecture: all
Installed-Size: 92160
Filename: mesh11sd_3.1.1-r1_all.ipk
Size: 19073
SHA256sum: fe28941a7a4ccc33938ce420f23cd2b4ef7fe61f4f509337737179fbf28c4663
Description:  Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks.
 It was originally designed to leverage 802.11s mesh networking at Captive Portal venues.
 This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes.
 It allows all mesh parameters supported by the wireless driver to be set in the uci config file.
 Settings take effect immediately without having to restart the wireless network.
 Default settings give rapid and reliable layer 2 mesh convergence.
 Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set.
 Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes.
 The mesh11sd daemon dynamically checks configured parameters and sets them as required.
 Upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled,
 and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh.
 Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier.
 This version does not require a Captive Portal to be running.

Package: minimalist-pcproxy
Version: 2014.12.12~2d6d1b0b-r7
Depends: libc, libubox20240329
License: BSD-3-Clause
Section: net
URL: https://github.com/fingon/minimalist-pcproxy
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: minimalist-pcproxy_2014.12.12~2d6d1b0b-r7_mipsel_mips32.ipk
Size: 7599
SHA256sum: 0837abb8430a99b96d464b7eeadbbd3238196c3527089a2070cfc5d93b188fd7
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: naywatch
Version: 1-r7
Depends: libc, owipcalc
License: GPL-2.0-only
Section: utils
Architecture: all
Installed-Size: 20480
Filename: naywatch_1-r7_all.ipk
Size: 2853
SHA256sum: 2f7470dd02a55b9c7079ffb7932ebf276ebb401bae1d7c7f5c61ee74046c7af5
Description:  Reboots or triggers watchdog if no link-local neighbor is available.
 
 Important:
 Be careful when you do a sysupgrade. Stop naywatch first, and make
 sure procd took control again of the watchdog.
 You can do this using 'ubus call system watchdog'.  Status should be "running".

Package: ndppd
Version: 0.2.5-r2
Depends: libc, libstdcpp6
License: GPL-3.0-or-later
Section: net
URL: http://www.priv.nu/projects/ndppd/
Architecture: mipsel_mips32
Installed-Size: 143360
Filename: ndppd_0.2.5-r2_mipsel_mips32.ipk
Size: 31686
SHA256sum: 84ad044118b4b73abd7f65ead9081ce680df0589704958485fa1d5e5281af23f
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 5.0.2-r1
Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra
License: GPL-2.0-or-later
Section: net
URL: https://github.com/nodogsplash/nodogsplash
Architecture: mipsel_mips32
Installed-Size: 235520
Filename: nodogsplash_5.0.2-r1_mipsel_mips32.ipk
Size: 46082
SHA256sum: adb7cb077f38cc02b148cf05034e526654f236fd6c8782ef4c43852d943ab22e
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.

Package: ohybridproxy
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329, mdnsd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: mipsel_mips32
Installed-Size: 81920
Filename: ohybridproxy_2020.05.22~0dfef1eb-r3_mipsel_mips32.ipk
Size: 12019
SHA256sum: b15ad531db87bea917a3a54f9e94eb06bd535a08a3cfa5f09f9922526be35ff5
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: olsrd-mod-arprefresh
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-arprefresh_2023.06.12~a9b3f1ac-r1_mipsel_mips32.ipk
Size: 2729
SHA256sum: cd70beaba98c916af21605ad49096f078858022acc973429dedb06fc8ab966b2
Description:  Kernel ARP cache refresh plugin

Package: olsrd-mod-bmf
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd, kmod-tun
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-bmf_2023.06.12~a9b3f1ac-r1_mipsel_mips32.ipk
Size: 12722
SHA256sum: cda6a20f6fc63ae8696f7e3b4f96b18fa5714df080e506a85aa2eb53b96cd5ca
Description:  Basic multicast forwarding plugin

Package: olsrd-mod-dot-draw
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-dot-draw_2023.06.12~a9b3f1ac-r1_mipsel_mips32.ipk
Size: 4447
SHA256sum: 9fb1af92471572f01722411edb900306ee092ee22caeb889abd32072676b2003
Description:  Dot topology information plugin

Package: olsrd-mod-dyn-gw-plain
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-dyn-gw-plain_2023.06.12~a9b3f1ac-r1_mipsel_mips32.ipk
Size: 3052
SHA256sum: f0c4518cc7b094b75209cc58c04df823b222afa642b41f8a4b67ce41af7d034c
Description:  Dynamic internet gateway plain plugin

Package: olsrd-mod-dyn-gw
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-dyn-gw_2023.06.12~a9b3f1ac-r1_mipsel_mips32.ipk
Size: 4843
SHA256sum: bed1e3a975677cce33ad98dbe2fb8ae4526d764b35b2ef38f7dcd3450087ca68
Description:  Dynamic internet gateway plugin

Package: olsrd-mod-filtergw
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-filtergw_2023.06.12~a9b3f1ac-r1_mipsel_mips32.ipk
Size: 3232
SHA256sum: 3c298d625dba05ae4df15739c767073a5a0973c1a141e6d0044c77ecf9510449
Description:  Filter Gateway plugin

Package: olsrd-mod-httpinfo
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 143360
Filename: olsrd-mod-httpinfo_2023.06.12~a9b3f1ac-r1_mipsel_mips32.ipk
Size: 31627
SHA256sum: 4437283c4aad74191513fc76780d31fa7744f8e4dcca00bc7e6bdc401e59e9c9
Description:  Small informative web server plugin

Package: olsrd-mod-jsoninfo
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-jsoninfo_2023.06.12~a9b3f1ac-r1_mipsel_mips32.ipk
Size: 23637
SHA256sum: 71b77098d40047dcd419d9d870846d13b4a31e3396f6aafc332b908ba968a6d0
Description:  Small informative plugin with JSON output

Package: olsrd-mod-mdns
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-mdns_2023.06.12~a9b3f1ac-r1_mipsel_mips32.ipk
Size: 9549
SHA256sum: b4bc3295ba51eb373c54c39f75523cb3413434cf0e7bd45d61cb4da72d715370
Description:  MDNS/Zeroconf/Bonjour packet distribution

Package: olsrd-mod-nameservice
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-nameservice_2023.06.12~a9b3f1ac-r1_mipsel_mips32.ipk
Size: 11934
SHA256sum: dc45118bd5340942e6e93ddd54fa7579b6f42186ccf17b1b143339ed1c8e7650
Description:  Lightweight hostname resolver plugin

Package: olsrd-mod-netjson
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-netjson_2023.06.12~a9b3f1ac-r1_mipsel_mips32.ipk
Size: 13944
SHA256sum: d91142eeca71778d5c897fc2fd468bf62225a16f9d064122fe08d1f412d8958b
Description:  netjson plugin with JSON output

Package: olsrd-mod-p2pd
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-p2pd_2023.06.12~a9b3f1ac-r1_mipsel_mips32.ipk
Size: 9190
SHA256sum: baeb029d15b8ebcf74858bbca406be98331e32a5bd38ff26eeafec804a82b6a0
Description:  Peer to Peer Discovery plugin

Package: olsrd-mod-pgraph
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-pgraph_2023.06.12~a9b3f1ac-r1_mipsel_mips32.ipk
Size: 3582
SHA256sum: c4c80ec76ed639a377aa8f0554999366bbb6857a82714b0111da4d42ed3752dc
Description:  output network topology for pgraph

Package: olsrd-mod-pud
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd, libgps30
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 256000
Filename: olsrd-mod-pud_2023.06.12~a9b3f1ac-r1_mipsel_mips32.ipk
Size: 62816
SHA256sum: 5bc0c23c87acbfac634376e4b8593888b0f24624365180d51dfabea3d0216fb1
Description:  Position Update Distribution plugin

Package: olsrd-mod-quagga
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-quagga_2023.06.12~a9b3f1ac-r1_mipsel_mips32.ipk
Size: 6955
SHA256sum: b2e6d1dad371d73b43f0dda94608f754e2c875e99f4478897a83f5f1cd7457c2
Description:  Quagga plugin

Package: olsrd-mod-secure
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-secure_2023.06.12~a9b3f1ac-r1_mipsel_mips32.ipk
Size: 11030
SHA256sum: 43f8dcb1797c019b14799f8dd3bccaed5bcc0829279866a8f550d5000386497b
Description:  Message signing plugin to secure routing domain

Package: olsrd-mod-sgwdynspeed
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-sgwdynspeed_2023.06.12~a9b3f1ac-r1_mipsel_mips32.ipk
Size: 5194
SHA256sum: 55c53035916ff6d4059445bc9bf166f80786797b8d84e3af113d079ecc7936c8
Description:  Smart Gateway dynamic speed plugin

Package: olsrd-mod-txtinfo
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-txtinfo_2023.06.12~a9b3f1ac-r1_mipsel_mips32.ipk
Size: 15687
SHA256sum: 2afffc64af78af5e21b1494e18499badefe1ef599b89a1ace4d9345246792354
Description:  Small informative web server plugin

Package: olsrd-mod-watchdog
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 81920
Filename: olsrd-mod-watchdog_2023.06.12~a9b3f1ac-r1_mipsel_mips32.ipk
Size: 2408
SHA256sum: 337711ceaccc037da81d74525e6eb90da1c62fc31a3d7eb54c7232dc5cd2b7cc
Description:  Watchdog plugin

Package: olsrd-utils
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 10240
Filename: olsrd-utils_2023.06.12~a9b3f1ac-r1_mipsel_mips32.ipk
Size: 1946
SHA256sum: 97c1eddad418401698e056bcafa6c0236d8a770f09c9fba77d8ca7cfae243ea3
Description:  Utils for OLSRD

Package: olsrd
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, libpthread, libubus20231128, iptables, ip6tables
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 368640
Filename: olsrd_2023.06.12~a9b3f1ac-r1_mipsel_mips32.ipk
Size: 139606
SHA256sum: da3e8aaf685942bbce451cb6c87482713ab09f9fffeaec86e27d6a6180d13239
Description:  OLSR (Optimized Link State Routing) daemon

Package: oonf-dlep-proxy
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 430080
Filename: oonf-dlep-proxy_2022.08.25~fb15d54d_mipsel_mips32.ipk
Size: 160468
SHA256sum: a36d78c5975ce7c481cd980f68060173a4c9a7c9e920436451cd0dd298830ebb
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 430080
Filename: oonf-dlep-radio_2022.08.25~fb15d54d_mipsel_mips32.ipk
Size: 156610
SHA256sum: 7ae4a78d9ce46e7f90f0f431e88c24bf76f91f039c2f5326c1f69589ebfb3cb5
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 10240
Filename: oonf-init-scripts_0.9.1-r3_mipsel_mips32.ipk
Size: 2302
SHA256sum: 1be9b40d3ce9976375c5afda1cb5766efdf9e03635cedc47680e39a0fe1b736f
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 2022.08.25~1cec9b21
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 634880
Filename: oonf-olsrd2_2022.08.25~1cec9b21_mipsel_mips32.ipk
Size: 232770
SHA256sum: 4a02d449c9bd93784008392e62b3234ee983a1133d6b4da78002b2c9db211550
Description:  Build Olsrd V2 Routing Agent

Package: opennds
Version: 10.2.0-r1
Depends: libc, libmicrohttpd-no-ssl
Conflicts: nodogsplash
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/opennds
Architecture: mipsel_mips32
Installed-Size: 624640
Filename: opennds_10.2.0-r1_mipsel_mips32.ipk
Size: 156164
SHA256sum: cdb048ca91115a28b23ff1ad7b133efd4f38db639faac87e7b9e30cf57a8bd1b
Description:  openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal.
 It provides a border control gateway between a public local area network and the Internet.
 It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points.
 Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported.
 This version uses nftables.

Package: pimbd
Version: 2018.06.19~dbf4e591-r4
Depends: libc, netifd
License: Apache-2.0
Section: net
URL: https://github.com/Oryon/pimbd.git
Architecture: mipsel_mips32
Installed-Size: 225280
Filename: pimbd_2018.06.19~dbf4e591-r4_mipsel_mips32.ipk
Size: 79424
SHA256sum: 9c09cc7d743c7b5f4466231c1102bbaf8cb5d01ad99f88b6a6b7d062f6fc35cc
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be
 installed and running in order for PIM to function.

Package: prince
Version: 0.4-r3
Depends: libc, libjson-c5, libpthread
License: MIT
Section: net
URL: https://github.com/AdvancedNetworkingSystems/prince
Architecture: mipsel_mips32
Installed-Size: 215040
Filename: prince_0.4-r3_mipsel_mips32.ipk
Size: 34031
SHA256sum: 7366664892d74a91aed2e414c73adabac441d8249d7f7a6c65f67fb7f285a410
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: vis
Version: 2013.04.07~7710cce4-r9
Depends: libc, libpthread
License: GPL-2.0-only
Section: net
URL: https://www.open-mesh.org/
Architecture: mipsel_mips32
Installed-Size: 81920
Filename: vis_2013.04.07~7710cce4-r9_mipsel_mips32.ipk
Size: 11130
SHA256sum: 21360275f4bb1fceb6f05b119e2540fb5099db19094a9bbe1ddac642965dfa15
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: zonestitcher_2020.05.22~0dfef1eb-r3_mipsel_mips32.ipk
Size: 9784
SHA256sum: 56cc0dde510b5b522448ba2c23629065bfed48c4335baba75fb369776bc13662
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.