Package: ahcpd
Version: 0.53-r3
Depends: libc, ip, librt
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/ahcp/
Architecture: mipsel_74kc
Installed-Size: 81920
Filename: ahcpd_0.53-r3_mipsel_74kc.ipk
Size: 20351
SHA256sum: 955fb8814be1b8782d3497fa6f9a8d7767459e6d6bfff76029702f771dc946b8
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
License: GPL-2.0-only MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mipsel_74kc
Installed-Size: 143360
Filename: alfred_2024.1-r1_mipsel_74kc.ipk
Size: 24765
SHA256sum: b13e56e4cf9b0122b7510e6280ba278df2021972d1713eff354e74bc31966826
Description:  alfred is a user space daemon for distributing arbitrary local information
 over the mesh/network in a decentralized fashion. This data can be anything
 which appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-r1
Depends: libc, librt
Section: net
URL: http://www.pps.univ-paris-diderot.fr/~jch/software/babel/
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: babel-pinger_0.1-r1_mipsel_74kc.ipk
Size: 4263
SHA256sum: f41ad523ebf2c80c7eb6161438eff9d1f211239fd4c5eca444f960ffd307f97d
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.13.1-r1
Depends: libc, libubus20231128, libubox20240329
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/babel/
Architecture: mipsel_74kc
Installed-Size: 153600
Filename: babeld_1.13.1-r1_mipsel_74kc.ipk
Size: 55340
SHA256sum: 5d9fa830e672711256c48fc6a7b0203c86170f4b12c4e49b3d1943f0f8365a3e
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is an IETF standard protocol (RFC 8966).

Package: batctl-default
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mipsel_74kc
Installed-Size: 143360
Filename: batctl-default_2024.1-r1_mipsel_74kc.ipk
Size: 38164
SHA256sum: 103252c6b877b2bb4c2c8a64b7dbb1786c9df674ba06936334f4e3c07643ac88
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.1 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mipsel_74kc
Installed-Size: 143360
Filename: batctl-full_2024.1-r1_mipsel_74kc.ipk
Size: 44438
SHA256sum: 0efceb493e22e000f012159102b10b92f3a5782f1521714a4fb93caf08c47a28
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.1 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: batctl-tiny_2024.1-r1_mipsel_74kc.ipk
Size: 12925
SHA256sum: 23ec89fb6b594b10e519fa84d211c4691b6414e59f1a4d54903f1f3f1f8be557
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.1 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-r1
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
URL: https://www.open-mesh.org/
Architecture: mipsel_74kc
Installed-Size: 143360
Filename: batmand_1440-r1_mipsel_74kc.ipk
Size: 35879
SHA256sum: a0f566d9ddf81971bd8afbb4688b7ffe147019a2142fd4487a17d30fbde96e90
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird2
Version: 2.14-r1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: mipsel_74kc
Installed-Size: 870400
Filename: bird2_2.14-r1_mipsel_74kc.ipk
Size: 350691
SHA256sum: 63d3861889f94f7b1003870cd0756c3580c2690280739eadef88621af8760b4b
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.14-r1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: bird2c_2.14-r1_mipsel_74kc.ipk
Size: 9117
SHA256sum: 2fd397f21d337556bd78315330c3fc4bbe091fc74a4891a268df758bf01feb22
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.14-r1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: bird2cl_2.14-r1_mipsel_74kc.ipk
Size: 7962
SHA256sum: 1b99970be25339df7490c73909a97a3a1bf35487b40e1e6d72a5f704f6e76cdd
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx7-iwinfo
Version: 7.1.1-r5
Depends: libc, bmx7, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: bmx7-iwinfo_7.1.1-r5_mipsel_74kc.ipk
Size: 4649
SHA256sum: e9b552017295728a9a6ca9a20799a8fdabfe00d38691db89431ef79eeb1e6d12
Description:  link characteristics plugin via libiwinfo (recommended!)

Package: bmx7-json
Version: 7.1.1-r5
Depends: libc, bmx7, libjson-c5
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: bmx7-json_7.1.1-r5_mipsel_74kc.ipk
Size: 8032
SHA256sum: 5b2c2567e67e993872180d7210ae811e18c1fcb8ab590df5b313459a4435433c
Description:  json plugin based on json-c

Package: bmx7-sms
Version: 7.1.1-r5
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: bmx7-sms_7.1.1-r5_mipsel_74kc.ipk
Size: 5909
SHA256sum: 2aae71594c6a2f23f684647bf5f9395c6b18a63348db87a7649744795840d666
Description:  sms plugin

Package: bmx7-table
Version: 7.1.1-r5
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: bmx7-table_7.1.1-r5_mipsel_74kc.ipk
Size: 9569
SHA256sum: 80d3de47410741692e218bdf3b3286b0417b68b3b7ec2ebdc065602d202926de
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: 7.1.1-r5
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: bmx7-topology_7.1.1-r5_mipsel_74kc.ipk
Size: 5625
SHA256sum: bfa3751abd107182000d004be9a67e3a80a32c94a8b48221b16b59dc08dd3317
Description:  topology plugin

Package: bmx7-tun
Version: 7.1.1-r5
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_74kc
Installed-Size: 81920
Filename: bmx7-tun_7.1.1-r5_mipsel_74kc.ipk
Size: 24755
SHA256sum: 4f15ee48f1141d022dbb60bafc58090206771fff723520f9fb3b7a83c7881d12
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: 7.1.1-r5
Depends: libc, bmx7, libuci20130104
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_74kc
Installed-Size: 81920
Filename: bmx7-uci-config_7.1.1-r5_mipsel_74kc.ipk
Size: 8283
SHA256sum: 26f1740c6e90beb2e295b9418c5e722ba543665f9aaf697fa95e1cf07042ee3c
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: 7.1.1-r5
Depends: libc, zlib, libmbedtls13, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_74kc
Installed-Size: 358400
Filename: bmx7_7.1.1-r5_mipsel_74kc.ipk
Size: 157475
SHA256sum: 79cf710de5c8d7c62eda5541964cdd5a6efe8aae2606475899cb7a3b9642f35b
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: cjdns-tests
Version: 21.1-r6
Depends: libc, libpthread, librt
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: mipsel_74kc
Installed-Size: 696320
Filename: cjdns-tests_21.1-r6_mipsel_74kc.ipk
Size: 333931
SHA256sum: b1660b66c477ef4c6882e2e40c5a3352498a78d786845aa205d9687a316e3046
Description:  cjdns test cases

Package: cjdns
Version: 21.1-r6
Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: mipsel_74kc
Installed-Size: 931840
Filename: cjdns_21.1-r6_mipsel_74kc.ipk
Size: 402198
SHA256sum: 377b8c0dee75b6836e24f60bb42e565472f9e8a13fe990d105b403ad0aeeb7ed
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: hnet-full-l2tp
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mipsel_74kc
Installed-Size: 10240
Filename: hnet-full-l2tp_2018.12.21~c4376661-r1_mipsel_74kc.ipk
Size: 1421
SHA256sum: 9ce99d90cd1704637c44ba46a5e00832cc1bf27f348f9e17f61126d43415d5cb
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mipsel_74kc
Installed-Size: 10240
Filename: hnet-full-secure_2018.12.21~c4376661-r1_mipsel_74kc.ipk
Size: 952
SHA256sum: 727687ee84ebf5234b24c563f9022fb8b2cbe2056fdd01c2a1b41841e9ab464e
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mipsel_74kc
Installed-Size: 10240
Filename: hnet-full_2018.12.21~c4376661-r1_mipsel_74kc.ipk
Size: 943
SHA256sum: f903f10110aaf0c6c38e4df6575f30a2eb3f9d8d639d47b7644e44a97aebd242
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mipsel_74kc
Installed-Size: 163840
Filename: hnetd-nossl_2018.12.21~c4376661-r1_mipsel_74kc.ipk
Size: 85153
SHA256sum: a8cba5968b72048c60f0bea3a42ec4762d0d1ab897250b9613a3f91797df05fa
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mipsel_74kc
Installed-Size: 235520
Filename: hnetd-openssl_2018.12.21~c4376661-r1_mipsel_74kc.ipk
Size: 93620
SHA256sum: b9e893230c9a32f860907ee0a6690c156fa490cce5dfbaf48a87cf85de5b798c
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-cjdns
Version: 1.3-r9
Depends: libc, cjdns, luci-compat, luci-base
License: GPL-3.0-or-later
Section: luci
URL: https://github.com/cjdelisle/cjdns
Architecture: mipsel_74kc
Installed-Size: 40960
Filename: luci-app-cjdns_1.3-r9_mipsel_74kc.ipk
Size: 6583
SHA256sum: 1e6a8da72b9e58074788d2726a6951cd2a6a99928c88b16e97e0e0e983520b53
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2018.12.21~c4376661-r1
Depends: libc
License: GPL-2.0-only
Section: luci
Architecture: mipsel_74kc
Installed-Size: 235520
Filename: luci-app-hnet_2018.12.21~c4376661-r1_mipsel_74kc.ipk
Size: 57619
SHA256sum: 54504da1872fd9ded925bc4e1996753d3c5b43811ad73254dd082bfe5461fd2e
Description:  HNCP Homenet configuration and visualization

Package: luci-app-olsrd2
Version: 0.2.6-r16
Depends: oonf-olsrd2, luci-mod-admin-full, libc
Section: luci
Architecture: all
Installed-Size: 61440
Filename: luci-app-olsrd2_0.2.6-r16_all.ipk
Size: 7782
SHA256sum: eec3f8cb8d87ec7efbb158abca04090eb109d30732ffe9a92031c45bbca9089d
Description:  OLSR2 configuration and status module

Package: mcproxy
Version: 2017.08.24~93b5ace4-r9
Depends: libc, libpthread, libstdcpp6
License: GPL-2.0-or-later
Section: net
URL: https://mcproxy.realmv6.org
Architecture: mipsel_74kc
Installed-Size: 348160
Filename: mcproxy_2017.08.24~93b5ace4-r9_mipsel_74kc.ipk
Size: 105013
SHA256sum: 499f48f47b28bf3961c49fbaf815c0c3140a70e541855c986d15b63ea99fe0fb
Description:  mcproxy is a free & open source implementation of the IGMP/MLD proxy function (see  RFC 4605) for Linux systems.
 It operates on the kernel tables for multicast routing and allows for multiple instantiations,
 as well as dynamically changing downstream interfaces.

Package: mesh11sd
Version: 3.1.1-r1
Depends: libc
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/mesh11sd
Architecture: all
Installed-Size: 92160
Filename: mesh11sd_3.1.1-r1_all.ipk
Size: 19073
SHA256sum: fe28941a7a4ccc33938ce420f23cd2b4ef7fe61f4f509337737179fbf28c4663
Description:  Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks.
 It was originally designed to leverage 802.11s mesh networking at Captive Portal venues.
 This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes.
 It allows all mesh parameters supported by the wireless driver to be set in the uci config file.
 Settings take effect immediately without having to restart the wireless network.
 Default settings give rapid and reliable layer 2 mesh convergence.
 Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set.
 Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes.
 The mesh11sd daemon dynamically checks configured parameters and sets them as required.
 Upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled,
 and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh.
 Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier.
 This version does not require a Captive Portal to be running.

Package: minimalist-pcproxy
Version: 2014.12.12~2d6d1b0b-r7
Depends: libc, libubox20240329
License: BSD-3-Clause
Section: net
URL: https://github.com/fingon/minimalist-pcproxy
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: minimalist-pcproxy_2014.12.12~2d6d1b0b-r7_mipsel_74kc.ipk
Size: 6636
SHA256sum: 40b563e003f66e2a9e30d5881d8047cd0cbe8ee455b6848de322c98406915b97
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: naywatch
Version: 1-r7
Depends: libc, owipcalc
License: GPL-2.0-only
Section: utils
Architecture: all
Installed-Size: 20480
Filename: naywatch_1-r7_all.ipk
Size: 2853
SHA256sum: 2f7470dd02a55b9c7079ffb7932ebf276ebb401bae1d7c7f5c61ee74046c7af5
Description:  Reboots or triggers watchdog if no link-local neighbor is available.
 
 Important:
 Be careful when you do a sysupgrade. Stop naywatch first, and make
 sure procd took control again of the watchdog.
 You can do this using 'ubus call system watchdog'.  Status should be "running".

Package: ndppd
Version: 0.2.5-r2
Depends: libc, libstdcpp6
License: GPL-3.0-or-later
Section: net
URL: http://www.priv.nu/projects/ndppd/
Architecture: mipsel_74kc
Installed-Size: 81920
Filename: ndppd_0.2.5-r2_mipsel_74kc.ipk
Size: 27800
SHA256sum: e177b7bbd8104d25dd1754710860332fe1688be801ac1890db6319177fdc2cdd
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 5.0.2-r1
Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra
License: GPL-2.0-or-later
Section: net
URL: https://github.com/nodogsplash/nodogsplash
Architecture: mipsel_74kc
Installed-Size: 174080
Filename: nodogsplash_5.0.2-r1_mipsel_74kc.ipk
Size: 43248
SHA256sum: 395ede73ebc2cebf670eadc4637fa11ee47b5c17973c4ce83b0984d6a8bf60f9
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.

Package: ohybridproxy
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329, mdnsd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: mipsel_74kc
Installed-Size: 81920
Filename: ohybridproxy_2020.05.22~0dfef1eb-r3_mipsel_74kc.ipk
Size: 10195
SHA256sum: 0d434d39a576864833fbc3c64c5ff8af76d020e52e64a294530fe2916f529ec6
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: olsrd-mod-arprefresh
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: olsrd-mod-arprefresh_2023.06.12~a9b3f1ac-r1_mipsel_74kc.ipk
Size: 2749
SHA256sum: f3520f3039b2a032b648a8dd7170e143bbf13c1deefbbbfc9493211741069fbb
Description:  Kernel ARP cache refresh plugin

Package: olsrd-mod-bmf
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd, kmod-tun
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: olsrd-mod-bmf_2023.06.12~a9b3f1ac-r1_mipsel_74kc.ipk
Size: 11740
SHA256sum: 5ddd700bfacff91b0656b3689bfacfc81e8bf738fb2fd7c14de54f156ded4790
Description:  Basic multicast forwarding plugin

Package: olsrd-mod-dot-draw
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: olsrd-mod-dot-draw_2023.06.12~a9b3f1ac-r1_mipsel_74kc.ipk
Size: 4372
SHA256sum: 975d2d2e5ccd1b1611f6b97a86bd39b97599d712de542fbb70826e57ffa30d53
Description:  Dot topology information plugin

Package: olsrd-mod-dyn-gw-plain
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: olsrd-mod-dyn-gw-plain_2023.06.12~a9b3f1ac-r1_mipsel_74kc.ipk
Size: 2928
SHA256sum: 5694b0ab262b690b63cadafece3ae3756f6fc4670262ec18810c2d350a95d634
Description:  Dynamic internet gateway plain plugin

Package: olsrd-mod-dyn-gw
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: olsrd-mod-dyn-gw_2023.06.12~a9b3f1ac-r1_mipsel_74kc.ipk
Size: 4444
SHA256sum: 81ae1a6712645938456e0f0e5562e9d832581e747d15bb3965bb37821f00008c
Description:  Dynamic internet gateway plugin

Package: olsrd-mod-filtergw
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: olsrd-mod-filtergw_2023.06.12~a9b3f1ac-r1_mipsel_74kc.ipk
Size: 3173
SHA256sum: 26efc919b513267135e6ce4c339879e9f082befc1927baad3534657dbeb5172c
Description:  Filter Gateway plugin

Package: olsrd-mod-httpinfo
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 143360
Filename: olsrd-mod-httpinfo_2023.06.12~a9b3f1ac-r1_mipsel_74kc.ipk
Size: 30990
SHA256sum: c72212ac9665c69c88ac732c50745b749e771e645caaf8fad1275970ae6edae1
Description:  Small informative web server plugin

Package: olsrd-mod-jsoninfo
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: olsrd-mod-jsoninfo_2023.06.12~a9b3f1ac-r1_mipsel_74kc.ipk
Size: 21556
SHA256sum: 867222c4a86be70d61498da1ba5689992d01bf7d5dcafd842db2efaa38e6b09a
Description:  Small informative plugin with JSON output

Package: olsrd-mod-mdns
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: olsrd-mod-mdns_2023.06.12~a9b3f1ac-r1_mipsel_74kc.ipk
Size: 9059
SHA256sum: 019316d31abb83e0dc3e3443f5a55d9453fd9b11656d28cec38dddd2c42a1c2c
Description:  MDNS/Zeroconf/Bonjour packet distribution

Package: olsrd-mod-nameservice
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: olsrd-mod-nameservice_2023.06.12~a9b3f1ac-r1_mipsel_74kc.ipk
Size: 10823
SHA256sum: 9dfd4b9fd148a09e1e1e6aec942de6339da1316a5c0f556a748e76ffb8b89448
Description:  Lightweight hostname resolver plugin

Package: olsrd-mod-netjson
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: olsrd-mod-netjson_2023.06.12~a9b3f1ac-r1_mipsel_74kc.ipk
Size: 12629
SHA256sum: 9e6f5877603a812b7c0efe72d6f100d62a72e0d4f696cad70307d52c2c101850
Description:  netjson plugin with JSON output

Package: olsrd-mod-p2pd
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: olsrd-mod-p2pd_2023.06.12~a9b3f1ac-r1_mipsel_74kc.ipk
Size: 8584
SHA256sum: 79d76a3a035f65560bebdd577c0f895aa22b7dc6adc81f310da514d09c068de6
Description:  Peer to Peer Discovery plugin

Package: olsrd-mod-pgraph
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: olsrd-mod-pgraph_2023.06.12~a9b3f1ac-r1_mipsel_74kc.ipk
Size: 3533
SHA256sum: 467805263ce31d9d31faaf8d4d39fddca02660cb271d4035691f2a3f6354caa9
Description:  output network topology for pgraph

Package: olsrd-mod-pud
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd, libgps30
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 153600
Filename: olsrd-mod-pud_2023.06.12~a9b3f1ac-r1_mipsel_74kc.ipk
Size: 59159
SHA256sum: 3389f3dcb959f93eb05a0455a3ce62d72cd485b1a45c8f586b6d86a31694a364
Description:  Position Update Distribution plugin

Package: olsrd-mod-quagga
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: olsrd-mod-quagga_2023.06.12~a9b3f1ac-r1_mipsel_74kc.ipk
Size: 6589
SHA256sum: cd972c9ffc2a459eff232095de2c4cf933a930720b7627005eb6adcb3ee6c7ee
Description:  Quagga plugin

Package: olsrd-mod-secure
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: olsrd-mod-secure_2023.06.12~a9b3f1ac-r1_mipsel_74kc.ipk
Size: 10617
SHA256sum: 926a133f10e48ae6613200a7b7570b1a6e0353868c0e326777e71784a03307ac
Description:  Message signing plugin to secure routing domain

Package: olsrd-mod-sgwdynspeed
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: olsrd-mod-sgwdynspeed_2023.06.12~a9b3f1ac-r1_mipsel_74kc.ipk
Size: 4993
SHA256sum: 40f3a9e0314d70cddd4d616e7dbb3e8c172f3591c437dcb2194a34c88e7c1a49
Description:  Smart Gateway dynamic speed plugin

Package: olsrd-mod-txtinfo
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: olsrd-mod-txtinfo_2023.06.12~a9b3f1ac-r1_mipsel_74kc.ipk
Size: 13930
SHA256sum: 3d884a7013591d9ce6fcb10c85bdbb8a0ad08e0919c84afc357bf8ec488f6e0a
Description:  Small informative web server plugin

Package: olsrd-mod-watchdog
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 81920
Filename: olsrd-mod-watchdog_2023.06.12~a9b3f1ac-r1_mipsel_74kc.ipk
Size: 2448
SHA256sum: d0880ed3d7c66fda337af02ebf66e33fb37ef23bda4aa6bef09d49850e9faa48
Description:  Watchdog plugin

Package: olsrd-utils
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 10240
Filename: olsrd-utils_2023.06.12~a9b3f1ac-r1_mipsel_74kc.ipk
Size: 1956
SHA256sum: 49051c6d0de28ffd06c7143b78c2a37cc2498f5d7ff1ca8c75318b8e58fae391
Description:  Utils for OLSRD

Package: olsrd
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, libpthread, libubus20231128, iptables, ip6tables
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 307200
Filename: olsrd_2023.06.12~a9b3f1ac-r1_mipsel_74kc.ipk
Size: 128090
SHA256sum: c7f7175853778611b3800c9a78cbb9fdf7c37ef5035743778ac0aaeb390c30a8
Description:  OLSR (Optimized Link State Routing) daemon

Package: oonf-dlep-proxy
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 296960
Filename: oonf-dlep-proxy_2022.08.25~fb15d54d_mipsel_74kc.ipk
Size: 137526
SHA256sum: 7ecff263b79cc5e485fa150005c972ec742c44c105ac7014bf1d52d248d259fd
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 296960
Filename: oonf-dlep-radio_2022.08.25~fb15d54d_mipsel_74kc.ipk
Size: 134140
SHA256sum: a92c32d765712814d045bca5fa4c323e63296d01b7787f6190a4dd54855ea7fc
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 10240
Filename: oonf-init-scripts_0.9.1-r3_mipsel_74kc.ipk
Size: 2301
SHA256sum: b0a494429acab6f83197e9a10bd4a050c1867a3d6a2df1f8373f72ee6fcc8d38
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 2022.08.25~1cec9b21
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 440320
Filename: oonf-olsrd2_2022.08.25~1cec9b21_mipsel_74kc.ipk
Size: 198555
SHA256sum: 47e5f9aa431c356d747d23f575cf68ff6f61a33788fce0e934102baef5faf352
Description:  Build Olsrd V2 Routing Agent

Package: opennds
Version: 10.2.0-r1
Depends: libc, libmicrohttpd-no-ssl
Conflicts: nodogsplash
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/opennds
Architecture: mipsel_74kc
Installed-Size: 624640
Filename: opennds_10.2.0-r1_mipsel_74kc.ipk
Size: 154089
SHA256sum: 1da668cd403f0312f549a9a2e59fdaaeb35091c916a101a30c1e305d6971b620
Description:  openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal.
 It provides a border control gateway between a public local area network and the Internet.
 It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points.
 Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported.
 This version uses nftables.

Package: pimbd
Version: 2018.06.19~dbf4e591-r4
Depends: libc, netifd
License: Apache-2.0
Section: net
URL: https://github.com/Oryon/pimbd.git
Architecture: mipsel_74kc
Installed-Size: 153600
Filename: pimbd_2018.06.19~dbf4e591-r4_mipsel_74kc.ipk
Size: 72909
SHA256sum: 1cc9bb7aa970a10c7addb0986882bf5df989ff0516dafd513643ff4e174fb74e
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be
 installed and running in order for PIM to function.

Package: prince
Version: 0.4-r3
Depends: libc, libjson-c5, libpthread
License: MIT
Section: net
URL: https://github.com/AdvancedNetworkingSystems/prince
Architecture: mipsel_74kc
Installed-Size: 215040
Filename: prince_0.4-r3_mipsel_74kc.ipk
Size: 34205
SHA256sum: 741fea882e480544513181b878a2bf4fbf8125785edfd4e40d690eedec452bdc
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: vis
Version: 2013.04.07~7710cce4-r9
Depends: libc, libpthread
License: GPL-2.0-only
Section: net
URL: https://www.open-mesh.org/
Architecture: mipsel_74kc
Installed-Size: 81920
Filename: vis_2013.04.07~7710cce4-r9_mipsel_74kc.ipk
Size: 9826
SHA256sum: f8a7455c8be4fd36c825319cb60e9f0e4b81fa02eef8a2ebe2ecbc32908598ec
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: zonestitcher_2020.05.22~0dfef1eb-r3_mipsel_74kc.ipk
Size: 8138
SHA256sum: abae3dc2a959a4f90e3c51f062936dab11ed3865dbe444b5c96a56762b1d0506
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.