Package: ahcpd
Version: 0.53-r3
Depends: libc, ip, librt
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/ahcp/
Architecture: arm_fa526
Installed-Size: 61440
Filename: ahcpd_0.53-r3_arm_fa526.ipk
Size: 22819
SHA256sum: c05e11324d8ea8a39ac35adad7d378958e4756573dad25308efd2898c888e490
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
License: GPL-2.0-only MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: arm_fa526
Installed-Size: 71680
Filename: alfred_2024.1-r1_arm_fa526.ipk
Size: 26087
SHA256sum: aada1c8173823f0ff1a74b71bac4ad6689605834227e059730d790943faa6b50
Description:  alfred is a user space daemon for distributing arbitrary local information
 over the mesh/network in a decentralized fashion. This data can be anything
 which appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-r1
Depends: libc, librt
Section: net
URL: http://www.pps.univ-paris-diderot.fr/~jch/software/babel/
Architecture: arm_fa526
Installed-Size: 20480
Filename: babel-pinger_0.1-r1_arm_fa526.ipk
Size: 4624
SHA256sum: f7617027f553181f8bc7d0651ade2a8ddcdd41257dedd0b470b1379efe47b360
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.13.1-r1
Depends: libc, libubus20231128, libubox20240329
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/babel/
Architecture: arm_fa526
Installed-Size: 133120
Filename: babeld_1.13.1-r1_arm_fa526.ipk
Size: 63356
SHA256sum: a2568c9aec9cfac2a37f98ebc72466adcff163d3a6cd8931f97399b8c836f15c
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is an IETF standard protocol (RFC 8966).

Package: batctl-default
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: arm_fa526
Installed-Size: 102400
Filename: batctl-default_2024.1-r1_arm_fa526.ipk
Size: 43602
SHA256sum: b12c0142edf96227845c0763c91d9e2a687e2bce6531c7e0b37659578428b90c
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.1 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: arm_fa526
Installed-Size: 112640
Filename: batctl-full_2024.1-r1_arm_fa526.ipk
Size: 50724
SHA256sum: 9fd82048e26c2b9106f0f93a71433517392b1fadae7e0456f2e27770e5523743
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.1 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: arm_fa526
Installed-Size: 40960
Filename: batctl-tiny_2024.1-r1_arm_fa526.ipk
Size: 14714
SHA256sum: e7430b4161d54ed10c79268c35be3bacaefa3a9d21dd329095f28944d941acf9
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.1 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-r1
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
URL: https://www.open-mesh.org/
Architecture: arm_fa526
Installed-Size: 102400
Filename: batmand_1440-r1_arm_fa526.ipk
Size: 43343
SHA256sum: 27e152bd9d4e8bb166b58960445b9452131a8c96df8a57dc69422e57199dd21c
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird2
Version: 2.14-r1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: arm_fa526
Installed-Size: 962560
Filename: bird2_2.14-r1_arm_fa526.ipk
Size: 382117
SHA256sum: 66bcabeba47123735516c698272bb616ff977448374985b3b86d1aedc417057e
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.14-r1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: arm_fa526
Installed-Size: 30720
Filename: bird2c_2.14-r1_arm_fa526.ipk
Size: 9796
SHA256sum: f5b3d5f9f9940f9191e610802982183cbeec0ffc1fd70d2c90e3398afb00634b
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.14-r1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: arm_fa526
Installed-Size: 30720
Filename: bird2cl_2.14-r1_arm_fa526.ipk
Size: 8459
SHA256sum: dd78e6cbd976c05bb0aaa94b8866c69dd9982943353429c7b3f31d2ce5304262
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx7-iwinfo
Version: 7.1.1-r5
Depends: libc, bmx7, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_fa526
Installed-Size: 20480
Filename: bmx7-iwinfo_7.1.1-r5_arm_fa526.ipk
Size: 4828
SHA256sum: 5d8e25c92415d68290d7a8824c4582a560dd4c1b3456fc778013ec6af0cba851
Description:  link characteristics plugin via libiwinfo (recommended!)

Package: bmx7-json
Version: 7.1.1-r5
Depends: libc, bmx7, libjson-c5
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_fa526
Installed-Size: 20480
Filename: bmx7-json_7.1.1-r5_arm_fa526.ipk
Size: 8468
SHA256sum: 23e8a25465a7bd58e2c5dc3e89de15165d3b296d6e1c0ab79f5ac29ca02b4432
Description:  json plugin based on json-c

Package: bmx7-sms
Version: 7.1.1-r5
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_fa526
Installed-Size: 20480
Filename: bmx7-sms_7.1.1-r5_arm_fa526.ipk
Size: 6104
SHA256sum: f4787ec467dcdce082b7c34fc946e86494c2d16146477a29cacee1ccb93894b7
Description:  sms plugin

Package: bmx7-table
Version: 7.1.1-r5
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_fa526
Installed-Size: 30720
Filename: bmx7-table_7.1.1-r5_arm_fa526.ipk
Size: 10297
SHA256sum: 778edc95462e70efbad5c48b0d901c7aacf3bd470de9928dc141f09e9aa72d35
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: 7.1.1-r5
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_fa526
Installed-Size: 20480
Filename: bmx7-topology_7.1.1-r5_arm_fa526.ipk
Size: 5777
SHA256sum: 5ea4f75b5349c8b9bd956594a43976f59b8b82872ee7f6a3835aa2ed95654fd0
Description:  topology plugin

Package: bmx7-tun
Version: 7.1.1-r5
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_fa526
Installed-Size: 61440
Filename: bmx7-tun_7.1.1-r5_arm_fa526.ipk
Size: 26448
SHA256sum: cb1ee0c39db860f7e8a670aa6c081d6df47c77facb6954ce66c5a16b18ea9398
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: 7.1.1-r5
Depends: libc, bmx7, libuci20130104
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_fa526
Installed-Size: 30720
Filename: bmx7-uci-config_7.1.1-r5_arm_fa526.ipk
Size: 8881
SHA256sum: 6accfd86da5f69352396cf52226016793b78f0c76681825f977e0feca72ac857
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: 7.1.1-r5
Depends: libc, zlib, libmbedtls13, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_fa526
Installed-Size: 348160
Filename: bmx7_7.1.1-r5_arm_fa526.ipk
Size: 173655
SHA256sum: ec39e6d2fc743520dc4b826d1fcf65bd93340649d4afab193562f3d593de41b7
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: cjdns-tests
Version: 21.1-r5
Depends: libc, libpthread, librt
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: arm_fa526
Installed-Size: 747520
Filename: cjdns-tests_21.1-r5_arm_fa526.ipk
Size: 346149
SHA256sum: 853454b6348525b84e8c5cedf7c14c053bee829f68682d20e57892cb043a52ef
Description:  cjdns test cases

Package: cjdns
Version: 21.1-r5
Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: arm_fa526
Installed-Size: 890880
Filename: cjdns_21.1-r5_arm_fa526.ipk
Size: 399847
SHA256sum: 78ca66161b8d4897fe866564ab17b7f351e4ae808f995ce4cd97a85c4491206c
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: hnet-full-l2tp
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: arm_fa526
Installed-Size: 10240
Filename: hnet-full-l2tp_2018.12.21~c4376661-r1_arm_fa526.ipk
Size: 1416
SHA256sum: 2f912a1cacd2d3843ae2ee3a74063d55c1740b1736ab2bc4f7c03eb9b68eac9b
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: arm_fa526
Installed-Size: 10240
Filename: hnet-full-secure_2018.12.21~c4376661-r1_arm_fa526.ipk
Size: 952
SHA256sum: 4d27fd971d4706e913a9af689e0d993dc774276dfc80c2062c52555c978c0184
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: arm_fa526
Installed-Size: 10240
Filename: hnet-full_2018.12.21~c4376661-r1_arm_fa526.ipk
Size: 944
SHA256sum: 5ca385c76e64e15efc4cdbabc91d4f497c881fcdd0609cd4d4887a9eafeea6dd
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: arm_fa526
Installed-Size: 215040
Filename: hnetd-nossl_2018.12.21~c4376661-r1_arm_fa526.ipk
Size: 94772
SHA256sum: 8b8a0f7feec2adf8cc7c15275100d3b3e2ecbdcb294d5a770dbc92ca3b67e567
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: arm_fa526
Installed-Size: 235520
Filename: hnetd-openssl_2018.12.21~c4376661-r1_arm_fa526.ipk
Size: 104621
SHA256sum: b31d254fc1d438ff82f2f69e0b51aa62470cc7a63c9e8ff0ddd04c7e707577b8
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-cjdns
Version: 1.3-r9
Depends: libc, cjdns, luci-compat, luci-base
License: GPL-3.0-or-later
Section: luci
URL: https://github.com/cjdelisle/cjdns
Architecture: arm_fa526
Installed-Size: 40960
Filename: luci-app-cjdns_1.3-r9_arm_fa526.ipk
Size: 6583
SHA256sum: f6c8f411492620c2cf54d29621ac7ce717471aef36df08cbe37218aad5b0170f
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2018.12.21~c4376661-r1
Depends: libc
License: GPL-2.0-only
Section: luci
Architecture: arm_fa526
Installed-Size: 235520
Filename: luci-app-hnet_2018.12.21~c4376661-r1_arm_fa526.ipk
Size: 57615
SHA256sum: 5732e99c2b3af9b2483e6f577f4f6338f20dcfe90600722d4cdc8cbb015a7ade
Description:  HNCP Homenet configuration and visualization

Package: luci-app-olsrd2
Version: 0.2.6-r15
Depends: oonf-olsrd2, luci-mod-admin-full, libc
Section: luci
Architecture: all
Installed-Size: 61440
Filename: luci-app-olsrd2_0.2.6-r15_all.ipk
Size: 7870
SHA256sum: ec496532cb79242d5567c8e1119c9bab348bb1de28465bf3c059cde2b4e2b431
Description:  OLSR2 configuration and status module

Package: mcproxy
Version: 2017.08.24~93b5ace4-r9
Depends: libc, libpthread, libstdcpp6
License: GPL-2.0-or-later
Section: net
URL: https://mcproxy.realmv6.org
Architecture: arm_fa526
Installed-Size: 327680
Filename: mcproxy_2017.08.24~93b5ace4-r9_arm_fa526.ipk
Size: 124115
SHA256sum: b1b53a0f941e829392962a6e2a48d82369fb5c74214feeb1fce98f355061bada
Description:  mcproxy is a free & open source implementation of the IGMP/MLD proxy function (see  RFC 4605) for Linux systems.
 It operates on the kernel tables for multicast routing and allows for multiple instantiations,
 as well as dynamically changing downstream interfaces.

Package: mesh11sd
Version: 3.1.1-r1
Depends: libc
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/mesh11sd
Architecture: all
Installed-Size: 92160
Filename: mesh11sd_3.1.1-r1_all.ipk
Size: 19073
SHA256sum: fe28941a7a4ccc33938ce420f23cd2b4ef7fe61f4f509337737179fbf28c4663
Description:  Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks.
 It was originally designed to leverage 802.11s mesh networking at Captive Portal venues.
 This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes.
 It allows all mesh parameters supported by the wireless driver to be set in the uci config file.
 Settings take effect immediately without having to restart the wireless network.
 Default settings give rapid and reliable layer 2 mesh convergence.
 Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set.
 Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes.
 The mesh11sd daemon dynamically checks configured parameters and sets them as required.
 Upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled,
 and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh.
 Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier.
 This version does not require a Captive Portal to be running.

Package: minimalist-pcproxy
Version: 2014.12.12~2d6d1b0b-r7
Depends: libc, libubox20240329
License: BSD-3-Clause
Section: net
URL: https://github.com/fingon/minimalist-pcproxy
Architecture: arm_fa526
Installed-Size: 20480
Filename: minimalist-pcproxy_2014.12.12~2d6d1b0b-r7_arm_fa526.ipk
Size: 7193
SHA256sum: 3b7893169f6b13d31990f4fa0ed12fd410236f85b244362a886c36d4db9a81e0
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: naywatch
Version: 1-r7
Depends: libc, owipcalc
License: GPL-2.0-only
Section: utils
Architecture: all
Installed-Size: 20480
Filename: naywatch_1-r7_all.ipk
Size: 2853
SHA256sum: 2f7470dd02a55b9c7079ffb7932ebf276ebb401bae1d7c7f5c61ee74046c7af5
Description:  Reboots or triggers watchdog if no link-local neighbor is available.
 
 Important:
 Be careful when you do a sysupgrade. Stop naywatch first, and make
 sure procd took control again of the watchdog.
 You can do this using 'ubus call system watchdog'.  Status should be "running".

Package: ndppd
Version: 0.2.5-r2
Depends: libc, libstdcpp6
License: GPL-3.0-or-later
Section: net
URL: http://www.priv.nu/projects/ndppd/
Architecture: arm_fa526
Installed-Size: 81920
Filename: ndppd_0.2.5-r2_arm_fa526.ipk
Size: 32445
SHA256sum: 145114b21270f4e81671dc7ab2cf8947425d4060448b36632e51216ce535ed9e
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 5.0.2-r1
Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra
License: GPL-2.0-or-later
Section: net
URL: https://github.com/nodogsplash/nodogsplash
Architecture: arm_fa526
Installed-Size: 122880
Filename: nodogsplash_5.0.2-r1_arm_fa526.ipk
Size: 47606
SHA256sum: 66f67151a0d8c397a6740c22c9d7112417bdac82ddb77d8a52aff6d9f949c2ca
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.

Package: ohybridproxy
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329, mdnsd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: arm_fa526
Installed-Size: 30720
Filename: ohybridproxy_2020.05.22~0dfef1eb-r3_arm_fa526.ipk
Size: 11153
SHA256sum: 1220ba04c7317175a5fe7c2bcc8b0ce564b689f683a61a726005dc6c6ed46834
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: olsrd-mod-arprefresh
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 10240
Filename: olsrd-mod-arprefresh_2023.06.12~a9b3f1ac-r1_arm_fa526.ipk
Size: 2727
SHA256sum: febef83c9ed364a139eb04e6b655767ec07c0c6e2244cbdb601471fa03b02dec
Description:  Kernel ARP cache refresh plugin

Package: olsrd-mod-bmf
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd, kmod-tun
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 30720
Filename: olsrd-mod-bmf_2023.06.12~a9b3f1ac-r1_arm_fa526.ipk
Size: 12934
SHA256sum: 715e7af1d811a0c0ceb12ca80f6103a6aeeb85745a0beb81389d6fe3d43c8d30
Description:  Basic multicast forwarding plugin

Package: olsrd-mod-dot-draw
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 20480
Filename: olsrd-mod-dot-draw_2023.06.12~a9b3f1ac-r1_arm_fa526.ipk
Size: 4580
SHA256sum: b945ef2796a03b23fdd569718b29a1c0f7efb5d7ec4eb738c0db16ef9f66a7ba
Description:  Dot topology information plugin

Package: olsrd-mod-dyn-gw-plain
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 20480
Filename: olsrd-mod-dyn-gw-plain_2023.06.12~a9b3f1ac-r1_arm_fa526.ipk
Size: 3072
SHA256sum: 4bdf40a9c01a3f7df8888ee7dbf48b68de1b3dc878316c4027714173871355e9
Description:  Dynamic internet gateway plain plugin

Package: olsrd-mod-dyn-gw
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 20480
Filename: olsrd-mod-dyn-gw_2023.06.12~a9b3f1ac-r1_arm_fa526.ipk
Size: 4736
SHA256sum: d9dbbe24981d6a3da4425dfa4b23516e5a76bebcc0f5bda5fdf008d9c1fbae0b
Description:  Dynamic internet gateway plugin

Package: olsrd-mod-filtergw
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 20480
Filename: olsrd-mod-filtergw_2023.06.12~a9b3f1ac-r1_arm_fa526.ipk
Size: 3296
SHA256sum: 0dc63e4f61dcc4acbc36ab2191b9a5fff98773febd15c63c65aa6d3bf8fd8bce
Description:  Filter Gateway plugin

Package: olsrd-mod-httpinfo
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 81920
Filename: olsrd-mod-httpinfo_2023.06.12~a9b3f1ac-r1_arm_fa526.ipk
Size: 33512
SHA256sum: 07ebaa3f914acca199f3ffe100cf10f00e8b523ffb7b7e9fbd0fdddf37d3922d
Description:  Small informative web server plugin

Package: olsrd-mod-jsoninfo
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 61440
Filename: olsrd-mod-jsoninfo_2023.06.12~a9b3f1ac-r1_arm_fa526.ipk
Size: 25361
SHA256sum: c0c2f76a4aa77d487e9fa8bb306e62f728600fc21cf17f09e70305e20a784b17
Description:  Small informative plugin with JSON output

Package: olsrd-mod-mdns
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 30720
Filename: olsrd-mod-mdns_2023.06.12~a9b3f1ac-r1_arm_fa526.ipk
Size: 9765
SHA256sum: f7df01f5ada3bfbd787df710fe79b84b8f784a8ee218edc3c882b31765a745c1
Description:  MDNS/Zeroconf/Bonjour packet distribution

Package: olsrd-mod-nameservice
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 30720
Filename: olsrd-mod-nameservice_2023.06.12~a9b3f1ac-r1_arm_fa526.ipk
Size: 11737
SHA256sum: 3b17e436f7694ae2ca5e77a4dd6087610d0f51ea5d16022fc44018cd167fbe68
Description:  Lightweight hostname resolver plugin

Package: olsrd-mod-netjson
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 40960
Filename: olsrd-mod-netjson_2023.06.12~a9b3f1ac-r1_arm_fa526.ipk
Size: 14503
SHA256sum: fd3016e0a3bf5fafd2d0948cf06486f60c556daff47ecae415fd6c74ccf4a516
Description:  netjson plugin with JSON output

Package: olsrd-mod-p2pd
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 20480
Filename: olsrd-mod-p2pd_2023.06.12~a9b3f1ac-r1_arm_fa526.ipk
Size: 9031
SHA256sum: e33b45fd311e10d3a7db035911ada0614dc91c42a8723a4aa331499df8ce57a4
Description:  Peer to Peer Discovery plugin

Package: olsrd-mod-pgraph
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 20480
Filename: olsrd-mod-pgraph_2023.06.12~a9b3f1ac-r1_arm_fa526.ipk
Size: 3657
SHA256sum: 3e574619135448892080823cb8a4a9dc42a6c6f4857a9af777aec865398c0730
Description:  output network topology for pgraph

Package: olsrd-mod-pud
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd, libgps30
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 184320
Filename: olsrd-mod-pud_2023.06.12~a9b3f1ac-r1_arm_fa526.ipk
Size: 62307
SHA256sum: 4efd896fd7572798d55e0fe7df03d93a4a1b2b8a0f90542a1cc222fe5e2e5cae
Description:  Position Update Distribution plugin

Package: olsrd-mod-quagga
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 20480
Filename: olsrd-mod-quagga_2023.06.12~a9b3f1ac-r1_arm_fa526.ipk
Size: 6807
SHA256sum: 6e35e54dc110289364ad81efead276c7f9a810ae59cf35ba5d9a87c3e1480010
Description:  Quagga plugin

Package: olsrd-mod-secure
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 30720
Filename: olsrd-mod-secure_2023.06.12~a9b3f1ac-r1_arm_fa526.ipk
Size: 11100
SHA256sum: 1c16a0f024cca86135e9f9242c41b226c871efeb679fe34a24234bcedf3098d2
Description:  Message signing plugin to secure routing domain

Package: olsrd-mod-sgwdynspeed
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 20480
Filename: olsrd-mod-sgwdynspeed_2023.06.12~a9b3f1ac-r1_arm_fa526.ipk
Size: 5070
SHA256sum: 90280d8bb3bd387848016611ef1483e3d24a39c4ab4bf05d2c9ccd30885a04b4
Description:  Smart Gateway dynamic speed plugin

Package: olsrd-mod-txtinfo
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 40960
Filename: olsrd-mod-txtinfo_2023.06.12~a9b3f1ac-r1_arm_fa526.ipk
Size: 16449
SHA256sum: a88ca4040f4d971e0184a52b9c7924417132eea2ccf473f695a475fbc1d24c7d
Description:  Small informative web server plugin

Package: olsrd-mod-watchdog
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 10240
Filename: olsrd-mod-watchdog_2023.06.12~a9b3f1ac-r1_arm_fa526.ipk
Size: 2355
SHA256sum: 25cdc9789e3b1cc2be29d39929b6cebd3fff406ba485125145415b1eb783ff6f
Description:  Watchdog plugin

Package: olsrd-utils
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 10240
Filename: olsrd-utils_2023.06.12~a9b3f1ac-r1_arm_fa526.ipk
Size: 1946
SHA256sum: 45e0cd97680407d6cedc0cb3cc6b9de814022a9ddfc1010aa2fe4744a9776a86
Description:  Utils for OLSRD

Package: olsrd
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, libpthread, libubus20231128, iptables, ip6tables
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 327680
Filename: olsrd_2023.06.12~a9b3f1ac-r1_arm_fa526.ipk
Size: 141699
SHA256sum: 7485556acc7db2015ca0200b242a8f2b0d278ad44b8c1d95286cd102a0d70ee7
Description:  OLSR (Optimized Link State Routing) daemon

Package: oonf-dlep-proxy
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 368640
Filename: oonf-dlep-proxy_2022.08.25~fb15d54d_arm_fa526.ipk
Size: 162188
SHA256sum: 9d81542ca1370ce5f294abebdfee80d8e6777f59a48523804c24dc0141731398
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 358400
Filename: oonf-dlep-radio_2022.08.25~fb15d54d_arm_fa526.ipk
Size: 158051
SHA256sum: 162afdf17eef58868ee85407cdecff02217e80f47646a4433500dfa4796feb86
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 10240
Filename: oonf-init-scripts_0.9.1-r3_arm_fa526.ipk
Size: 2302
SHA256sum: 16aa889f704093677e97cc53b938ea1511a88983e6106917d8a96afcf92f876e
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 2022.08.25~1cec9b21
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 532480
Filename: oonf-olsrd2_2022.08.25~1cec9b21_arm_fa526.ipk
Size: 234840
SHA256sum: e4dd8f794d5850d512ca7fcdea09f9885786f818e3f81da0eda812da51cc9865
Description:  Build Olsrd V2 Routing Agent

Package: opennds
Version: 10.2.0-r1
Depends: libc, libmicrohttpd-no-ssl
Conflicts: nodogsplash
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/opennds
Architecture: arm_fa526
Installed-Size: 552960
Filename: opennds_10.2.0-r1_arm_fa526.ipk
Size: 160317
SHA256sum: 3010af167199dc40a8996c34de579053ce1bb81d08d88f3032d84dd1f3ea0a81
Description:  openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal.
 It provides a border control gateway between a public local area network and the Internet.
 It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points.
 Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported.
 This version uses nftables.

Package: pimbd
Version: 2018.06.19~dbf4e591-r4
Depends: libc, netifd
License: Apache-2.0
Section: net
URL: https://github.com/Oryon/pimbd.git
Architecture: arm_fa526
Installed-Size: 194560
Filename: pimbd_2018.06.19~dbf4e591-r4_arm_fa526.ipk
Size: 83705
SHA256sum: 9bbb47f2489b8749b9e4af6d72fa1a126bc0e6d3e2566a95915956e5463b56b2
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be
 installed and running in order for PIM to function.

Package: prince
Version: 0.4-r3
Depends: libc, libjson-c5, libpthread
License: MIT
Section: net
URL: https://github.com/AdvancedNetworkingSystems/prince
Architecture: arm_fa526
Installed-Size: 81920
Filename: prince_0.4-r3_arm_fa526.ipk
Size: 27940
SHA256sum: 992c8d4373c3cbba4c6ab221b7fc0d7f2ae46ad11323eec0bd25eee71354ffca
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: vis
Version: 2013.04.07~7710cce4-r9
Depends: libc, libpthread
License: GPL-2.0-only
Section: net
URL: https://www.open-mesh.org/
Architecture: arm_fa526
Installed-Size: 30720
Filename: vis_2013.04.07~7710cce4-r9_arm_fa526.ipk
Size: 11137
SHA256sum: 3b8501fe765f1d17bdc8612ecd48eda4bf017d7fcbf251da814e57964142b63d
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: arm_fa526
Installed-Size: 20480
Filename: zonestitcher_2020.05.22~0dfef1eb-r3_arm_fa526.ipk
Size: 9033
SHA256sum: be1bc3554e071a894b47c91f625bc4f1c967f96c3ac18f0b45027903ed0f1531
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.