Package: ahcpd Version: 0.53-r3 Depends: libc, ip, librt License: MIT Section: net URL: https://www.irif.fr/~jch/software/ahcp/ Architecture: arm_cortex-a9 Installed-Size: 61440 Filename: ahcpd_0.53-r3_arm_cortex-a9.ipk Size: 22763 SHA256sum: ea2ce3ba5b772799ce597a60f4f903cde8a73de4f84f03ed1aa46ad3e8c2bb35 Description: Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc Configuration Protocol (AHCP). AHCP is designed for wireless mesh networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may also be used on wired networks. Package: alfred Version: 2024.0-r1 Depends: libc, libnl-tiny1, librt License: GPL-2.0-only MIT Section: net URL: https://www.open-mesh.org/ Architecture: arm_cortex-a9 Installed-Size: 71680 Filename: alfred_2024.0-r1_arm_cortex-a9.ipk Size: 26128 SHA256sum: b63948167e9e1f610b380471b0e3637f5aab2c81007df8749724339182a5395c Description: alfred is a user space daemon for distributing arbitrary local information over the mesh/network in a decentralized fashion. This data can be anything which appears to be useful - originally designed to replace the batman-adv visualization (vis), you may distribute hostnames, phone books, administration information, DNS information, the local weather forecast ... alfred runs as daemon in the background of the system. A user may insert information by using the alfred binary on the command line, or use special programs to communicate with alfred (done via unix sockets). alfred then takes care of distributing the local information to other alfred servers on other nodes. This is done via IPv6 link-local multicast, and does not require any configuration. A user can request data from alfred, and will receive the information available from all alfred servers in the network. Package: babel-pinger Version: 0.1-r1 Depends: libc, librt Section: net URL: http://www.pps.univ-paris-diderot.fr/~jch/software/babel/ Architecture: arm_cortex-a9 Installed-Size: 20480 Filename: babel-pinger_0.1-r1_arm_cortex-a9.ipk Size: 4599 SHA256sum: 744a038ba1926c8db75522d2ce68633017fb5631da4c143e5011f373e2ae4035 Description: Babel-pinger is a hack to export a default route into Babel for people using DHCP to configure their routers rather than speaking to their upstream provider with a proper routing protocol. Package: babeld Version: 1.13.1-r1 Depends: libc, libubus20231128, libubox20240126 License: MIT Section: net URL: https://www.irif.fr/~jch/software/babel/ Architecture: arm_cortex-a9 Installed-Size: 133120 Filename: babeld_1.13.1-r1_arm_cortex-a9.ipk Size: 63039 SHA256sum: fc7f74c56681caae01147677e0059826649cd28ccb05d9146b514e3d0a8f8f93 Description: Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4 with fast convergence properties. It is based on the ideas in DSDV, AODV and Cisco's EIGRP, but is designed to work well not only in wired networks but also in wireless mesh networks, and has been extended with support for overlay networks. Babel is an IETF standard protocol (RFC 8966). Package: batctl-default Version: 2024.0-r1 Depends: libc, libnl-tiny1, librt Provides: batctl Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default License: GPL-2.0-only ISC MIT Section: net URL: https://www.open-mesh.org/ Architecture: arm_cortex-a9 Installed-Size: 102400 Filename: batctl-default_2024.0-r1_arm_cortex-a9.ipk Size: 43471 SHA256sum: 7b1dd18a4f12e601c2d877d5030529cb2d5be3f88cc7753eade710166e3364bc Description: batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced. It is an easier method for configuring batman-adv and provides some additional tools for debugging as well. This package builds version 2024.0 of the user space utility. Standard subcommands for configuration and online debugging are enabled. Package: batctl-full Version: 2024.0-r1 Depends: libc, libnl-tiny1, librt Provides: batctl Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full License: GPL-2.0-only ISC MIT Section: net URL: https://www.open-mesh.org/ Architecture: arm_cortex-a9 Installed-Size: 112640 Filename: batctl-full_2024.0-r1_arm_cortex-a9.ipk Size: 50744 SHA256sum: 6284ee550f1fd31724527c60b0eb3d93e813db9733a129d8356757bc0d277959 Description: batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced. It is an easier method for configuring batman-adv and provides some additional tools for debugging as well. This package builds version 2024.0 of the user space utility. Subcommands for configuration, online and offline debugging are enabled. Package: batctl-tiny Version: 2024.0-r1 Depends: libc, libnl-tiny1, librt Provides: batctl Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny License: GPL-2.0-only ISC MIT Section: net URL: https://www.open-mesh.org/ Architecture: arm_cortex-a9 Installed-Size: 40960 Filename: batctl-tiny_2024.0-r1_arm_cortex-a9.ipk Size: 14665 SHA256sum: 9677a8d918b59de91923c78df684eec123db9e642ef30278f5cd6f8f14894b27 Description: batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced. It is an easier method for configuring batman-adv and provides some additional tools for debugging as well. This package builds version 2024.0 of the user space utility. Only configuration relevant subcommands are enabled. Package: batmand Version: 1440-r1 Depends: libc, libpthread, kmod-tun License: GPL-2.0 Section: net URL: https://www.open-mesh.org/ Architecture: arm_cortex-a9 Installed-Size: 102400 Filename: batmand_1440-r1_arm_cortex-a9.ipk Size: 40964 SHA256sum: e06f111e13363603721ded3f41e47a2d549b48d8678218102c0ebd2397c2d99c Description: B.A.T.M.A.N. layer 3 routing daemon Package: bird2 Version: 2.14-r1 Depends: libc, libpthread Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6 License: GPL-2.0-or-later Section: net URL: http://bird.network.cz/ Architecture: arm_cortex-a9 Installed-Size: 952320 Filename: bird2_2.14-r1_arm_cortex-a9.ipk Size: 374549 SHA256sum: 97c506eaf9fedb6bd81e5c2bda942937aca0d2931d01a2186aeb77df3c668695 Description: BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and OSPFv3, RIPng, Babel and BGP protocols for IPv6. In BGP, BIRD supports communities, multiprotocol extensions, MD5 authentication, 32bit AS numbers and could act as a route server or a route reflector. BIRD also supports multiple RIBs, multiple kernel routing tables and redistribution between the protocols with a powerful configuration syntax. This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6 into a single branch, and also adds support for the Babel routing protocol. Package: bird2c Version: 2.14-r1 Depends: libc, bird2, libreadline8, libncurses6 Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6 License: GPL-2.0-or-later Section: net URL: http://bird.network.cz/ Architecture: arm_cortex-a9 Installed-Size: 30720 Filename: bird2c_2.14-r1_arm_cortex-a9.ipk Size: 9778 SHA256sum: 92528f7a13e8e47f94016cf8b1f3383dc1f4baa532f8d5f748d2e7922d340101 Description: BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. This is a BIRD command-line client. It is used to send commands to BIRD, commands can perform simple actions such as enabling/disabling of protocols, telling BIRD to show various information, telling it to show a routing table filtered by a filter, or asking BIRD to reconfigure. Unless you can't afford dependency on ncurses and readline, you should install BIRD command-line client together with BIRD. Package: bird2cl Version: 2.14-r1 Depends: libc, bird2 Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6 License: GPL-2.0-or-later Section: net URL: http://bird.network.cz/ Architecture: arm_cortex-a9 Installed-Size: 30720 Filename: bird2cl_2.14-r1_arm_cortex-a9.ipk Size: 8457 SHA256sum: 7d3a66e8e5889732eed330173d17cfe7671ede189a8614c6e9e7710b9aa880e4 Description: BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. This is a BIRD lightweight command-line client. It is used to send commands to BIRD, commands can perform simple actions such as enabling/disabling of protocols, telling BIRD to show various information, telling it to show a routing table filtered by a filter, or asking BIRD to reconfigure. Package: bmx7-iwinfo Version: 7.1.1-r5 Depends: libc, bmx7, libiwinfo20230701 License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: arm_cortex-a9 Installed-Size: 20480 Filename: bmx7-iwinfo_7.1.1-r5_arm_cortex-a9.ipk Size: 4764 SHA256sum: 4c9d4087fb2e36448654dec703dcd88f28b055492125b34173249bf4d3c45146 Description: link characteristics plugin via libiwinfo (recommended!) Package: bmx7-json Version: 7.1.1-r5 Depends: libc, bmx7, libjson-c5 License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: arm_cortex-a9 Installed-Size: 20480 Filename: bmx7-json_7.1.1-r5_arm_cortex-a9.ipk Size: 8423 SHA256sum: 459f02eddc2fd77019ece934c96176a1603c3df1ada6d61b02e7702f6f55ae64 Description: json plugin based on json-c Package: bmx7-sms Version: 7.1.1-r5 Depends: libc, bmx7 License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: arm_cortex-a9 Installed-Size: 20480 Filename: bmx7-sms_7.1.1-r5_arm_cortex-a9.ipk Size: 6015 SHA256sum: 0cc7c1eafadd8172c4613a4ee4958094497ab8333ebbcb8af676509cf7481f9d Description: sms plugin Package: bmx7-table Version: 7.1.1-r5 Depends: libc, bmx7, bmx7-tun License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: arm_cortex-a9 Installed-Size: 30720 Filename: bmx7-table_7.1.1-r5_arm_cortex-a9.ipk Size: 10375 SHA256sum: d213e2a4fa616426bcbef1955bddba3a1fc55f707bd18244171f107528f0a985 Description: plugin to announce routes from tables via tunnels Package: bmx7-topology Version: 7.1.1-r5 Depends: libc, bmx7 License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: arm_cortex-a9 Installed-Size: 20480 Filename: bmx7-topology_7.1.1-r5_arm_cortex-a9.ipk Size: 5720 SHA256sum: 8b94adf1fc34e4ebfe0311a04c15fefd7d316da5bb19243f430559c4e270cccc Description: topology plugin Package: bmx7-tun Version: 7.1.1-r5 Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: arm_cortex-a9 Installed-Size: 61440 Filename: bmx7-tun_7.1.1-r5_arm_cortex-a9.ipk Size: 26254 SHA256sum: 16dd1a4eace816286dc44f2f1d1b52902202bd00c592b9f96f8ec07b06d34903 Description: ipip-based tunnel plugin (recommended!) Package: bmx7-uci-config Version: 7.1.1-r5 Depends: libc, bmx7, libuci20130104 License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: arm_cortex-a9 Installed-Size: 30720 Filename: bmx7-uci-config_7.1.1-r5_arm_cortex-a9.ipk Size: 8867 SHA256sum: 53a2c6ef892a97f4e22147c44cde769054cf4fd2ef4812aa03346b2bc755b833 Description: configuration plugin based on uci (recommended!) Package: bmx7 Version: 7.1.1-r5 Depends: libc, zlib, libmbedtls13, libiwinfo20230701 License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: arm_cortex-a9 Installed-Size: 348160 Filename: bmx7_7.1.1-r5_arm_cortex-a9.ipk Size: 172632 SHA256sum: 3c9902544e534202d13e32539fbe0e4debb8103650a9065a1518a15ba811a142 Description: BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing Package: cjdns-tests Version: v21.1-r5 Depends: libc, libpthread, librt License: GPL-3.0-or-later Section: net URL: https://github.com/cjdelisle/cjdns Architecture: arm_cortex-a9 Installed-Size: 737280 Filename: cjdns-tests_v21.1-r5_arm_cortex-a9.ipk Size: 343114 SHA256sum: b0d4ebb099a2bec376d9bc30783472cc2b5e54fea539f57ee9ffff4b1d0bdbc8 Description: cjdns test cases Package: cjdns Version: v21.1-r5 Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2 License: GPL-3.0-or-later Section: net URL: https://github.com/cjdelisle/cjdns Architecture: arm_cortex-a9 Installed-Size: 880640 Filename: cjdns_v21.1-r5_arm_cortex-a9.ipk Size: 397842 SHA256sum: 3df726cfacbfc68f8002f188d885a422b589c807fb0e6411080e0a5519923ff3 Description: Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks. Package: hnet-full-l2tp Version: 2018.12.21~c4376661-r1 Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy License: GPL-2.0-only Section: net URL: https://github.com/sbyx/hnetd Architecture: arm_cortex-a9 Installed-Size: 10240 Filename: hnet-full-l2tp_2018.12.21~c4376661-r1_arm_cortex-a9.ipk Size: 1416 SHA256sum: 87e9787ec57db9f7d4ae72922a05f99047a9b122146a59aaf9738aa0b9b918b4 Description: HNCP Homenet metapackage (w/ L2TP) Package: hnet-full-secure Version: 2018.12.21~c4376661-r1 Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy License: GPL-2.0-only Section: net URL: https://github.com/sbyx/hnetd Architecture: arm_cortex-a9 Installed-Size: 10240 Filename: hnet-full-secure_2018.12.21~c4376661-r1_arm_cortex-a9.ipk Size: 956 SHA256sum: ef57cc1e726b64be038c4644844579239250b38f2e6bab84aa431b2abf35f523 Description: HNCP Homenet metapackage (w/ SSL) Package: hnet-full Version: 2018.12.21~c4376661-r1 Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy License: GPL-2.0-only Section: net URL: https://github.com/sbyx/hnetd Architecture: arm_cortex-a9 Installed-Size: 10240 Filename: hnet-full_2018.12.21~c4376661-r1_arm_cortex-a9.ipk Size: 942 SHA256sum: 21a1a8a405042d0aa2d8f4e1318118b53fd461c0d40d9f753ba22cb109f79cb5 Description: HNCP Homenet metapackage Package: hnetd-nossl Version: 2018.12.21~c4376661-r1 Depends: libc, odhcpd, odhcp6c, netifd License: GPL-2.0-only Section: net URL: https://github.com/sbyx/hnetd Architecture: arm_cortex-a9 Installed-Size: 204800 Filename: hnetd-nossl_2018.12.21~c4376661-r1_arm_cortex-a9.ipk Size: 93009 SHA256sum: ffc1dd23bd35506f457e646663726f5146cd5e35f5cfe32dcdf72e468e9fcee9 Description: This package provides a daemon which implementats distributed prefix assignment and service discovery for a home network consisting of multiple routers connected to multiple service providers. It provides a netifd protocol "hnet" for use in /etc/config/network. Package: hnetd-openssl Version: 2018.12.21~c4376661-r1 Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3 License: GPL-2.0-only Section: net URL: https://github.com/sbyx/hnetd Architecture: arm_cortex-a9 Installed-Size: 225280 Filename: hnetd-openssl_2018.12.21~c4376661-r1_arm_cortex-a9.ipk Size: 102705 SHA256sum: 2818c8f6203c14d8109d1a6db24fa894a7865e907a98f3ed6a345ebbbe213052 Description: This package provides a daemon which implementats distributed prefix assignment and service discovery for a home network consisting of multiple routers connected to multiple service providers. It provides a netifd protocol "hnet" for use in /etc/config/network. Package: luci-app-cjdns Version: 1.3-r9 Depends: libc, cjdns, luci-compat, luci-base License: GPL-3.0-or-later Section: luci URL: https://github.com/cjdelisle/cjdns Architecture: arm_cortex-a9 Installed-Size: 40960 Filename: luci-app-cjdns_1.3-r9_arm_cortex-a9.ipk Size: 6586 SHA256sum: 339603cc122f851b03f611ce0cf6c245c40891f37c1117a5d291a93432e39c5c Description: Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks. Package: luci-app-hnet Version: 2018.12.21~c4376661-r1 Depends: libc License: GPL-2.0-only Section: luci Architecture: arm_cortex-a9 Installed-Size: 235520 Filename: luci-app-hnet_2018.12.21~c4376661-r1_arm_cortex-a9.ipk Size: 57619 SHA256sum: 53a253ed913a06fa0326401821bc67c928b0f4dbb21ea4f7dbd692b42866ea83 Description: HNCP Homenet configuration and visualization Package: luci-app-olsrd2 Version: 0.2.6-r15 Depends: oonf-olsrd2, luci-mod-admin-full, libc Section: luci Architecture: all Installed-Size: 61440 Filename: luci-app-olsrd2_0.2.6-r15_all.ipk Size: 7870 SHA256sum: ec496532cb79242d5567c8e1119c9bab348bb1de28465bf3c059cde2b4e2b431 Description: OLSR2 configuration and status module Package: mcproxy Version: 2017.08.24~93b5ace4-r9 Depends: libc, libpthread, libstdcpp6 License: GPL-2.0-or-later Section: net URL: https://mcproxy.realmv6.org Architecture: arm_cortex-a9 Installed-Size: 317440 Filename: mcproxy_2017.08.24~93b5ace4-r9_arm_cortex-a9.ipk Size: 123031 SHA256sum: 4c7cac95f0b22d605762b6631307e185106d9430da027f9ff043ab0cc15d3ac2 Description: mcproxy is a free & open source implementation of the IGMP/MLD proxy function (see RFC 4605) for Linux systems. It operates on the kernel tables for multicast routing and allows for multiple instantiations, as well as dynamically changing downstream interfaces. Package: mesh11sd Version: 3.1.0-r1 Depends: libc License: GPL-2.0-or-later Section: net URL: https://github.com/opennds/mesh11sd Architecture: all Installed-Size: 92160 Filename: mesh11sd_3.1.0-r1_all.ipk Size: 18785 SHA256sum: 99b216f49a5973c930b8574d5891ad60f75c5574df7d96fd4796aa24bd6c1efd Description: Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks. It was originally designed to leverage 802.11s mesh networking at Captive Portal venues. This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes. It allows all mesh parameters supported by the wireless driver to be set in the uci config file. Settings take effect immediately without having to restart the wireless network. Default settings give rapid and reliable layer 2 mesh convergence. Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set. Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes. The mesh11sd daemon dynamically checks configured parameters and sets them as required. Upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled, and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh. Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier. This version does not require a Captive Portal to be running. Package: minimalist-pcproxy Version: 2014.12.12~2d6d1b0b-r7 Depends: libc, libubox20240126 License: BSD-3-Clause Section: net URL: https://github.com/fingon/minimalist-pcproxy Architecture: arm_cortex-a9 Installed-Size: 20480 Filename: minimalist-pcproxy_2014.12.12~2d6d1b0b-r7_arm_cortex-a9.ipk Size: 7164 SHA256sum: e3978d02e22ac750fe8ff21975cd293e9fbca34c1ee79a1214719eba52640822 Description: This package contains a daemon which can be used to forward PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers. In and of itself, it is not very useful, but combined with hnetd+miniupnpd it allows for control of NAT forwarding and firewall pinholes from multiple hops away. Package: naywatch Version: 1-r7 Depends: libc, owipcalc License: GPL-2.0-only Section: utils Architecture: all Installed-Size: 20480 Filename: naywatch_1-r7_all.ipk Size: 2853 SHA256sum: 2f7470dd02a55b9c7079ffb7932ebf276ebb401bae1d7c7f5c61ee74046c7af5 Description: Reboots or triggers watchdog if no link-local neighbor is available. Important: Be careful when you do a sysupgrade. Stop naywatch first, and make sure procd took control again of the watchdog. You can do this using 'ubus call system watchdog'. Status should be "running". Package: ndppd Version: 0.2.5-r2 Depends: libc, libstdcpp6 License: GPL-3.0-or-later Section: net URL: http://www.priv.nu/projects/ndppd/ Architecture: arm_cortex-a9 Installed-Size: 81920 Filename: ndppd_0.2.5-r2_arm_cortex-a9.ipk Size: 32655 SHA256sum: 15c3748ef13d22a687750b5143ad6f6a4b176dec7bbdd3b5fe1c48222c13475b Description: ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery Protocol) messages between interfaces. ndppd currently only supports Neighbor Solicitation Messages and Neighbor Advertisement Messages. The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts are supported. No subnets. ndppd solves this by listening for Neighbor Solicitation messages on an interface, then query the internal interfaces for that target IP before finally sending a Neighbor Advertisement message. Package: nodogsplash Version: 5.0.2-r1 Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra License: GPL-2.0-or-later Section: net URL: https://github.com/nodogsplash/nodogsplash Architecture: arm_cortex-a9 Installed-Size: 122880 Filename: nodogsplash_5.0.2-r1_arm_cortex-a9.ipk Size: 47064 SHA256sum: 962391f15695b5b7b6e88d5f5d39aabd898c7c932899b9227c52c3d44240e78a Description: Nodogsplash is a Captive Portal that offers a simple way to provide restricted access to the Internet by showing a splash page to the user before Internet access is granted. Package: ohybridproxy Version: 2020.05.22~0dfef1eb-r3 Depends: libc, libubox20240126, mdnsd License: GPL-2.0-only Section: net URL: https://github.com/sbyx/ohybridproxy Architecture: arm_cortex-a9 Installed-Size: 30720 Filename: ohybridproxy_2020.05.22~0dfef1eb-r3_arm_cortex-a9.ipk Size: 11052 SHA256sum: d4e2458f1e94179fc4e4b1aa9caf501b6828fea3be0a0452ea24f9866bbe694e Description: This package provides a statically configured daemon for translating DNS requests to Multicast DNS and back again. Package: olsrd-mod-arprefresh Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: arm_cortex-a9 Installed-Size: 10240 Filename: olsrd-mod-arprefresh_2023.06.12~a9b3f1ac-r1_arm_cortex-a9.ipk Size: 2748 SHA256sum: f91dd3662dd3ce8a948fef5f9f8f3586639e5eedd5ac0cd424a9ab5cce9bf6e8 Description: Kernel ARP cache refresh plugin Package: olsrd-mod-bmf Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd, kmod-tun License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: arm_cortex-a9 Installed-Size: 30720 Filename: olsrd-mod-bmf_2023.06.12~a9b3f1ac-r1_arm_cortex-a9.ipk Size: 12755 SHA256sum: a02aba689b0f82dc482ce22696cbd5b4e3885907e253324b8f17a87317bddbc7 Description: Basic multicast forwarding plugin Package: olsrd-mod-dot-draw Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: arm_cortex-a9 Installed-Size: 20480 Filename: olsrd-mod-dot-draw_2023.06.12~a9b3f1ac-r1_arm_cortex-a9.ipk Size: 4556 SHA256sum: 46af7b540fe33437482eff2b4bbff626b0ef83e25acc8191a8930a81dad341cf Description: Dot topology information plugin Package: olsrd-mod-dyn-gw-plain Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: arm_cortex-a9 Installed-Size: 20480 Filename: olsrd-mod-dyn-gw-plain_2023.06.12~a9b3f1ac-r1_arm_cortex-a9.ipk Size: 3050 SHA256sum: 323c8318c2aa3d438c7a41b4dd895dca898131c925ec75ae34ccbdc4e82d5e29 Description: Dynamic internet gateway plain plugin Package: olsrd-mod-dyn-gw Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: arm_cortex-a9 Installed-Size: 20480 Filename: olsrd-mod-dyn-gw_2023.06.12~a9b3f1ac-r1_arm_cortex-a9.ipk Size: 4729 SHA256sum: ffb0376c812405a23466e688a28279350d2e65de8fcb7ec6df3db2bf1c87b552 Description: Dynamic internet gateway plugin Package: olsrd-mod-filtergw Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: arm_cortex-a9 Installed-Size: 20480 Filename: olsrd-mod-filtergw_2023.06.12~a9b3f1ac-r1_arm_cortex-a9.ipk Size: 3287 SHA256sum: b79274e1f4ca4e5579799ca8494ec05388befca1ffc2b8d3f78176d4c27d56ce Description: Filter Gateway plugin Package: olsrd-mod-httpinfo Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: arm_cortex-a9 Installed-Size: 81920 Filename: olsrd-mod-httpinfo_2023.06.12~a9b3f1ac-r1_arm_cortex-a9.ipk Size: 33460 SHA256sum: 0d70fdf6d7edf0831baad89c411ad1cfacec16abec9e45d786cbfcc081aee3e0 Description: Small informative web server plugin Package: olsrd-mod-jsoninfo Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: arm_cortex-a9 Installed-Size: 61440 Filename: olsrd-mod-jsoninfo_2023.06.12~a9b3f1ac-r1_arm_cortex-a9.ipk Size: 25243 SHA256sum: 8adbc5dd05ef16f0551aac7a0747e20d34e45ca1e95af1db719d5815d4b6b94d Description: Small informative plugin with JSON output Package: olsrd-mod-mdns Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: arm_cortex-a9 Installed-Size: 30720 Filename: olsrd-mod-mdns_2023.06.12~a9b3f1ac-r1_arm_cortex-a9.ipk Size: 9755 SHA256sum: 6ae20dd6c78a883c8425a1d92fd7e3711779f466a446f02cdffc9862fb1bbbe8 Description: MDNS/Zeroconf/Bonjour packet distribution Package: olsrd-mod-nameservice Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: arm_cortex-a9 Installed-Size: 30720 Filename: olsrd-mod-nameservice_2023.06.12~a9b3f1ac-r1_arm_cortex-a9.ipk Size: 11639 SHA256sum: 57179901eb7aa98786c277d014dfd5159655cae4dfc0daabb0d1dcb45db9a653 Description: Lightweight hostname resolver plugin Package: olsrd-mod-netjson Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: arm_cortex-a9 Installed-Size: 40960 Filename: olsrd-mod-netjson_2023.06.12~a9b3f1ac-r1_arm_cortex-a9.ipk Size: 14342 SHA256sum: addc6af274aa0a280f7e468039973f7ec2a60cbe3ae955e19d538243d7b75549 Description: netjson plugin with JSON output Package: olsrd-mod-p2pd Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: arm_cortex-a9 Installed-Size: 20480 Filename: olsrd-mod-p2pd_2023.06.12~a9b3f1ac-r1_arm_cortex-a9.ipk Size: 8980 SHA256sum: 40fcdba3109484153bbc4a2cfa301afc84e5bbcc0f09b0c32b06b734be634bff Description: Peer to Peer Discovery plugin Package: olsrd-mod-pgraph Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: arm_cortex-a9 Installed-Size: 20480 Filename: olsrd-mod-pgraph_2023.06.12~a9b3f1ac-r1_arm_cortex-a9.ipk Size: 3650 SHA256sum: a85ec9093d2633c3eee2839156cd36f10529c965dbde29715299ad7c69258110 Description: output network topology for pgraph Package: olsrd-mod-pud Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd, libgps30 License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: arm_cortex-a9 Installed-Size: 174080 Filename: olsrd-mod-pud_2023.06.12~a9b3f1ac-r1_arm_cortex-a9.ipk Size: 61011 SHA256sum: 8c7d1fbd667fdd7a15c5fce95f2e484d641a2a7674a4f275bf92f1b1cf93828d Description: Position Update Distribution plugin Package: olsrd-mod-quagga Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: arm_cortex-a9 Installed-Size: 20480 Filename: olsrd-mod-quagga_2023.06.12~a9b3f1ac-r1_arm_cortex-a9.ipk Size: 6855 SHA256sum: 20505974cf2dffbbdb8e898bc86081f658fe0e227d4b9b96c9df7a10a5b59596 Description: Quagga plugin Package: olsrd-mod-secure Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: arm_cortex-a9 Installed-Size: 30720 Filename: olsrd-mod-secure_2023.06.12~a9b3f1ac-r1_arm_cortex-a9.ipk Size: 11158 SHA256sum: 65d751cec0d8bf885d48ecbf8dccb2a0ee3cd8b571bd5b58f823c916d614161f Description: Message signing plugin to secure routing domain Package: olsrd-mod-sgwdynspeed Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: arm_cortex-a9 Installed-Size: 20480 Filename: olsrd-mod-sgwdynspeed_2023.06.12~a9b3f1ac-r1_arm_cortex-a9.ipk Size: 5083 SHA256sum: b1294e9d9977c8b7dad59863f386bdc0964ce3fbc88ef98db3cf21b4f4846726 Description: Smart Gateway dynamic speed plugin Package: olsrd-mod-txtinfo Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: arm_cortex-a9 Installed-Size: 40960 Filename: olsrd-mod-txtinfo_2023.06.12~a9b3f1ac-r1_arm_cortex-a9.ipk Size: 16294 SHA256sum: bfbb6f0e857f85c90edab0a4fa3c50f5c3febb45b8e4efc9449e7ce6e4eeb049 Description: Small informative web server plugin Package: olsrd-mod-watchdog Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: arm_cortex-a9 Installed-Size: 10240 Filename: olsrd-mod-watchdog_2023.06.12~a9b3f1ac-r1_arm_cortex-a9.ipk Size: 2351 SHA256sum: 12de1ba2a3dba6b53f9d6eafff00154972645157383f533561c3bc0635fe4353 Description: Watchdog plugin Package: olsrd-utils Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: arm_cortex-a9 Installed-Size: 10240 Filename: olsrd-utils_2023.06.12~a9b3f1ac-r1_arm_cortex-a9.ipk Size: 1945 SHA256sum: 19ecad0bd8723c933950c13f7bd34bbf8b097906da44110adf95adef3e653081 Description: Utils for OLSRD Package: olsrd Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, libpthread, libubus20231128, iptables, ip6tables License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: arm_cortex-a9 Installed-Size: 317440 Filename: olsrd_2023.06.12~a9b3f1ac-r1_arm_cortex-a9.ipk Size: 141040 SHA256sum: 38025335b7c4ced7a70846f5b116cdd02fbc1fa72164c3397e64d48adb6dd87b Description: OLSR (Optimized Link State Routing) daemon Package: oonf-dlep-proxy Version: 2022.08.25~fb15d54d Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts Section: net URL: http://www.olsr.org/ Architecture: arm_cortex-a9 Installed-Size: 378880 Filename: oonf-dlep-proxy_2022.08.25~fb15d54d_arm_cortex-a9.ipk Size: 161587 SHA256sum: 037b80a6139a6f37ea02cce269d9966f2f480d0244bf015662cc91dcd55460dc Description: Build DLEP Radio+Router Agent Package: oonf-dlep-radio Version: 2022.08.25~fb15d54d Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts Section: net URL: http://www.olsr.org/ Architecture: arm_cortex-a9 Installed-Size: 368640 Filename: oonf-dlep-radio_2022.08.25~fb15d54d_arm_cortex-a9.ipk Size: 157522 SHA256sum: 5a3189c55f0691801e2fe996e85410106664676fdd2a12897923371ee2f5ac8e Description: Build DLEP Radio Agent Package: oonf-init-scripts Version: 0.9.1-r3 Depends: libc Section: net URL: http://www.olsr.org/ Architecture: arm_cortex-a9 Installed-Size: 10240 Filename: oonf-init-scripts_0.9.1-r3_arm_cortex-a9.ipk Size: 2305 SHA256sum: e921c2adb2041703ec7fa33419fc6419441d77c9d935d3ebdb7a02c71f05c44a Description: Common OONF startup scripts Package: oonf-olsrd2 Version: 2022.08.25~1cec9b21 Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts Section: net URL: http://www.olsr.org/ Architecture: arm_cortex-a9 Installed-Size: 532480 Filename: oonf-olsrd2_2022.08.25~1cec9b21_arm_cortex-a9.ipk Size: 233691 SHA256sum: 554b90f81fe2946738fb86d25013f1472de014493faca1d0217151a030903db7 Description: Build Olsrd V2 Routing Agent Package: opennds Version: 10.2.0-r1 Depends: libc, libmicrohttpd-no-ssl Conflicts: nodogsplash License: GPL-2.0-or-later Section: net URL: https://github.com/opennds/opennds Architecture: arm_cortex-a9 Installed-Size: 552960 Filename: opennds_10.2.0-r1_arm_cortex-a9.ipk Size: 158772 SHA256sum: 39e4525228da128484bb81d24ea879ec176d7e501d56709d09c62cf58a16342f Description: openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal. It provides a border control gateway between a public local area network and the Internet. It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points. Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported. This version uses nftables. Package: pimbd Version: 2018.06.19~dbf4e591-r4 Depends: libc, netifd License: Apache-2.0 Section: net URL: https://github.com/Oryon/pimbd.git Architecture: arm_cortex-a9 Installed-Size: 194560 Filename: pimbd_2018.06.19~dbf4e591-r4_arm_cortex-a9.ipk Size: 82943 SHA256sum: 33339113018e5eef7ee5083e1e15b2670ef654b849e132f39c08f481cbcb33d1 Description: This package provides a daemon which implements the Protocol Independent Multicast BIDIR routing protocol. Note that a routing protocol must be installed and running in order for PIM to function. Package: prince Version: 0.4-r3 Depends: libc, libjson-c5, libpthread License: MIT Section: net URL: https://github.com/AdvancedNetworkingSystems/prince Architecture: arm_cortex-a9 Installed-Size: 81920 Filename: prince_0.4-r3_arm_cortex-a9.ipk Size: 27707 SHA256sum: 2421f47c0902f00eb421f1222cea99d0b012ed6c3addb653facc25c0a4f4a06e Description: Prince is an open source implementation of the PopRouting Algorithm. It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento. Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc), calculates the betweenness centrality using the topology and then computes the the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon. Since v0.4 it supports both OONF and OLSRd. Package: vis Version: 2013.04.07~7710cce4-r9 Depends: libc, libpthread License: GPL-2.0-only Section: net URL: https://www.open-mesh.org/ Architecture: arm_cortex-a9 Installed-Size: 30720 Filename: vis_2013.04.07~7710cce4-r9_arm_cortex-a9.ipk Size: 10963 SHA256sum: e516b64dec1c27dd00918eba0edc3fe2ef554b6740d7e2559ca0aa67fa908e5d Description: visualization server for B.A.T.M.A.N. layer 3 Package: zonestitcher Version: 2020.05.22~0dfef1eb-r3 Depends: libc, libubox20240126 License: GPL-2.0-only Section: net URL: https://github.com/sbyx/ohybridproxy Architecture: arm_cortex-a9 Installed-Size: 20480 Filename: zonestitcher_2020.05.22~0dfef1eb-r3_arm_cortex-a9.ipk Size: 8936 SHA256sum: 45b9cbaa375a78d231c7722b75543712e1c2bac9a628ee33178dbec9a2995c7d Description: This package provides a statically configured daemon for translating DNS requests to Multicast DNS and back again.